Liqui Moly Molygen New Generation 10W-30 Engine Oil 5L - 9978
Liqui Moly Molygen New Generation 10W-30 is a high performance low-friction motor oil for year-round use. The combination of unconventional base oils and advanced additive technology as well as the special Molygen additive ensures that the motor oil is of low viscosity with a high shear stability and reliably prevents the formation of deposits, significantly reduces frictional losses in the engine and provides the optimum protection from wear. This results in fuel savings and an extended service life for the engine.
Ideal for modern Asian and American gasoline engines with multi-valve technology and turbocharging with and without charge air cooling. For the protection and value retention of the engine during long intervals between oil changes and where there are extreme demands on the engine.
Application:
- The operating instructions of the vehicle and engine manufacturers must be followed. Can be mixed with all commercially available motor oils. Optimum effectiveness is only possible when the product is used unmixed.
Features:
- Excellent wear resistance
- Friction and wear reducing
- Smooth engine running
- Tested for turbochargers and catalytic converters
- Outstanding engine cleanliness
- Outstanding shear resistance
- Excellent high and low temperature behavior
- Outstanding lubrication reliability
- Miscible with all commercially available motor oils
- Optimum stability to aging
Approvals:
- API SP
- ILSAC GF-6A
Liqui Moly recommends this product for vehicles that needs to comply the following specifications:
- Chrysler MS-6395
- Daihatsu
- Ford
- GM 6094 M
- Honda
- Hyundai
- Isuzu
- Kia
- Mazda
- Mitsubishi
- Nissan
- Subaru
- Suzuki
- Toyota
Part Number: 9978
SAE class (engine oils): | 10W-30 |
SAE J300 | |
Density at: | 15 °C 0,85 g/cm� |
DIN 51757 | |
Viscosity at | 40 �C 66,9 mm�/s |
ASTM D 7042-04 | |
Viscosity at | 100 �C 11 mm�/s |
ASTM D 7042-04 | |
Viscosity at | -30 �C (MRV) <= 60000 mPas |
ASTM D 4684 | |
Viscosity at | -25 �C (CCS) >= 7000 mPas |
ASTM D 5293 | |
Viscosity index | 156 |
DIN ISO 2909 | |
HTHS: | at 150�C >= 2,9 mPas |
ASTM D 5481 Pour point: | -42 �C |
DIN ISO 3016 | |
Evaporation loss (Noack): | 8,2 % |
CEC-L-40-A-93 | |
Flash point: | 238 �C |
DIN ISO 2592 | |
Total base number: | 7,1 mg KOH/g |
DIN ISO 3771 | |
Sulfate ash | < 0,8 g/100g |
DIN 51575 | |
Color / appearance: | green-brown, fluorescent |
Shipping Weight | 4.6300kg |