Application:

• Petrol Engine Boost + effectively lifts the zinc levels of the engine oil without increasing the phosphorus levels, allowing it to be used in conjunction with Mid and Low SAPS engine oils used in modern low-emission engines.
• Petrol Engine Boost + is designed for use in modern and classic 4, 6 & 8+ cylinder, multi-cam, multi-valve including VVT, naturally aspirated, supercharged & turbocharged engines. It can be used in high-performance and standard engines, as well as in competition and normal on/off-road use. However, it is not suitable for use in 2-stroke engines.
• Petrol Engine Boost + is ideal for use with full synthetic, semi-synthetic, or mineral-based high-performance engine oils. It is very suitable for use in low and mid SAPS, fuel economy petrol engine oils for modern low-emission engines. Its advanced formula will not harm exhaust catalysts.

One 500ml bottle adds the following approximate PPM from the booster pack to the engine oil:

Sump Size - Zinc Increase:

• 4 Litre: 1066
• 5 Litre: 865
• 6 Litre: 710

One 500ml bottle in a 6L sump is sufficient to take a typical mid SAPS petrol engine oil to a zinc level of about 1510ppm, without increasing the levels of Phosphorus, Sulphated Ash, or Sulphur.

• Petrol Engine Boost + has been proven in race and competition conditions in engines requiring high-performance engine oils. It is the product of choice for many competitors running competition vehicles in circuit & drag racing, rallying, drifting, hill climb, targa, time trials, and regularity.

Please Note: Petrol Engine Boost + is not suitable for diesel engines.

Vehicle & Fuel Types:

Petrol Engine Boost + is suitable for use in competition applications and on-road in passenger cars and light commercial vehicles. It can be used with vehicles running on Petrol, LPG, E10, E85 (Competition Only), avgas, methanol, nitro, methanol & other fuels. However, it is not suitable for use in diesel engines or in four-stroke motorcycles with wet clutches as the friction modifier will impact clutch performance.

Benefits:

• Increased wear protection (wear reduction of 3% in laboratory tests)
• Reduces friction by up to 10% (shown in laboratory HFRR test)
• Decreases friction as temperature increases (test results compared at 70°C, 100°C, and 130°C)
• Better power at oil operating temperature in severe competition conditions
• Better fuel economy for on-road applications
• Base DI pack maintains the balance of the base engine oil performance
• Compatible with mineral, semi-synthetic, and full synthetic engine oils.
• Will not harm exhaust catalysts

Part number: PSPEB0005