Penrite Radiator Corrosion Inhibitor Anti-Freeze Fluid 1L - COOL1001
SKU: 5302443 / OA04008
Part Number: COOL1001
Replaces Pro Coolant Radiator Inhibitor.
100% Concentrate.
Suitable for passenger cars, light commercial vehicles, motorcycles, trucks, buses, stationary engines, and other equipment.
Silicate, Phosphate, and Amine Free.
Safe for all plastics, rubber hoses, and seals.
Not recommended for mixing with other coolants or inhibitors.
Not compatible with glycol coolant test strips due to potential false readings.
100% Concentrate.
Suitable for passenger cars, light commercial vehicles, motorcycles, trucks, buses, stationary engines, and other equipment.
Silicate, Phosphate, and Amine Free.
Safe for all plastics, rubber hoses, and seals.
Not recommended for mixing with other coolants or inhibitors.
Not compatible with glycol coolant test strips due to potential false readings.
$24.99
Buy now, Pay later options
Added to Your Cart
Product Availability by Store Location
Hours
Check Suitability
Click & Collect
Delivery
Penrite Radiator Corrosion Inhibitor Anti-Freeze Fluid is a green coloured, hybrid-organic, Type "B", corrosion inhibitor concentrate that protects against cavitation, scaling and oxidisation in vehicles that do not require an Anti-Freeze Anti-Boil cooIant.
It is an effective engine coolant that uses a Hybrid Organic Acid Technology (HOAT) inhibitor to provide maximum protection against corrosion whilst providing superior heat transfer to reduce engine operating temperature.
Features:
- Protects all internal surfaces from corrosion, including aluminum.
- Safe for all plastics, rubber hoses, and seals.
- Helps prevent wet liner erosion.
- Contains an antifoam agent to protect against cavitation.
- Silicate, Phosphate, and Amine Free.
- Cost-effective engine protection.
Application:
- Radiator Corrosion Inhibitor is suitable for use in a wide range of vehicles, including passenger cars, light commercial vehicles, motorcycles, trucks, buses, stationary engines, and other equipment.
- When mixed with water, Radiator Corrosion Inhibitor enhances heat transfer abilities over straight water by reducing cavitation and eliminating hot spots inside the engine. This helps lower the running temperature of the engine, preventing damage from overheating, while the inhibitor pack prevents rust, corrosion, scaling, and oxidation if maintained at the correct dosage.
Dosage:
- Radiator Corrosion Inhibitor should be used at a ratio of 50ml per liter of water. Penrite recommends mixing with Penrite De-Mineralised Water. One liter makes up to 20 liters of coolant.
Hint: For best results, flush the cooling system with Radiator Flush prior to filling with Radiator Corrosion Inhibitor.
Important Notes:
- We do not recommend mixing with other coolants or inhibitors.
- This product is not Compatible for testing with glycol coolant test strips as false readings can occur.
- Radiator Corrosion Inhibitor Replaces Pro Coolant Radiator Inhibitor.
- A 58mm cap with pouring tap is available to fit 20-liter packs.
Product Performance Levels:
- AS/NZS 2108.1-1997 Type B
- Deutz-MWM 0199-209
- Ford ESD-M99B166C
- MAN 248
- MAN B&W D36 5600
- Sulzer Diesel ZBS0503
- Wartsila 32-9011
Part number: COOL1001
Colour | Green |
Density at 20°C, kg/L | 1.08 |
Glycol Content, g/L | 280 |
Service Intervals: | |
Vehicle Type | Kilometres / Hours |
Passenger Car | 100,000 KMS |
Light Commercial | 100,000 KMS |
Heavy Duty On Road | 3 Years, 500,000 KMS |
Heavy Duty Off Road | 3 Years, 6,000 Hours |
Stationary Power Generation | 12,000 Hours |
Marine | 12,000 Hours |
Penrite Radiator Corrosion Inhibitor Anti-Freeze Fluid 1L - COOL1001
$24.99
Added to Your Cart
Product Availability by Store Location
Hours