It uses the latest and advanced PSi-OAT (Phosphate and Silicate Organic Acid Technology) based inhibitor system which is ideal for modern “downsized”, high power density, hotter running engines used in the latest generation of passenger cars as well as in many other engines. The extended long-life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system for 8 years or 500,000km. It is available in both concentrate and premix formulations.

Application:

• Purple OEM Coolant is suitable for the cooling systems of petrol, LPG, light and heavy-duty diesel and industrial engines where anti-freeze / anti-boil and anti-corrosion properties are required. It is suitable for passenger cars, 4WD’s, motorcycles, light & heavy-duty commercial vehicles, construction and agricultural equipment. It is suitable for use with Australian, European, Asian & US vehicles.  
• Purple OEM Coolant is Approved for use in VAG (Volkswagen Automotive Group) vehicles such as Volkswagen, Audi, Skoda, Bentley, Lamborghini, Bugatti, Porsche, SEAT where the new TL 774-L/G12evo specifications are required. It may also be used as a replacement where TL 744-J (G13) was previously specified, provided a full system service is completed. The advanced formulation is ideal for use in vehicles such as Toyota, Hyundai, Mitsubishi, Kia and other Asian manufacturers that require P-OAT based coolants.
• Purple OEM Coolant may be used in all types of vehicles that use Glysantin G65 initial fill coolants or where Pink, Purple, Blue or Red coloured OAT based coolants were used.  It can replace green coolants using P-OAT or PSi-OAT technology (after appropriate flushing). It is suitable for use in and out of warranty service to maintain OEM performance.
• Purple OEM Coolant PREMIX is a 50% concentration in demineralised water, ready-to-use product that is to be poured directly into the cooling system. No further dilution is required. It can be used as a complete service refill, top up and is safe to mix with compatible “type A” coolants.

Penrite recommends flushing the cooling system prior to a complete service refill. Penrite Radiator Flush effectively cleans the system in 7 minutes and prepares the cooling system for new coolant.

Please Note: A 58mm cap with pouring tap is available to fit 20 litre packs. 

Benefits:

• 8 Year 500,000km drain intervals if used and maintained at 50%
• Pre-mixed with de-mineralised water and can be poured directly into the cooling system 
• OEM Approved to maintain manufacturer’s warranty & specifications
• Note: Premix coolants do not require further dilution with demineralized water
• Improved tolerance for flux-brazed aluminium heat exchangers
• Compatible with plastics, rubbers and seals.
• Extra hard water flexibility
• Protects against pitting of cylinder liners
• Protects against cavitation
• Formulated to meet strict European EHS regulations
• Protects all internal surfaces from corrosion, including cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics used in the cooling system
• Does not require supplementary additives
• Free from Nitrites, borates and amines.

Part number: COOLPURPLEPMX001