Penrite Enviro+ GF-S 5W-30 Full Synthetic Engine Oil is a premium oil designed to deliver superior protection, performance, and fuel efficiency for modern engines. Suitable for both gasoline and diesel engines, this oil meets the latest industry standards for environmental performance.

Features:

• API Licensed for Quality Assurance.
• API SP Resource Conserving, SN Plus and ILSAC GF-6A Oil Specifications.
• Improved engine durability, better fuel economy, increased wear protection.
• Enhanced LSPI (Low Speed Pre-ignition) protection.
• Reduced turbo charger deposits.
• Better wear protection for "idle Stop" engines.
• Improved oxidation and deposit control and aeration.
• Long engine oil drain intervals.
• Maximises fuel economy.
• Maximum engine life.
• Catalyst and oxygen sensor friendly.
• Ethanol fuel compatible - safe With E85.
• Suitable for Hybrid Petrol / Electric Vehicles.
• Excellent resistance to viscosity and thermal breakdown even in extreme service.
• Superior cold engine start up performance, minimising friction and wear at start-up.

Application:

• Enviro+ GF-S is designed for use in modern 4, 6 & 8+ cylinder  multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged petrol low emission engines including petrol/electric hybrids.
• Enviro+ GF-S may be used where SAE 5W-20 and SAE 5W-30 grade oils are recommended by the manufacturer. It can be used where API SP, SN Plus or previous specifications API SN (2010-2020), API SM (2006-2010) and API SL (2002-2006) as well as where ILSAC GF-6A, GF-5, GF-4 & GF-3 fuel economy oils are recommended.
• Enviro+ GF-S is an API SP Resource Conserving, SN Plus and ILSAC GF-6A licensed product, providing improved turbocharger deposit control, oxidation, aeration, fuel economy, fuel economy retention, timing chain and idle stop wear protection and enhanced low speed pre-ignition (LSPI) protection over API SN / ILSAC GF-5 grade oils. It is recommended for most General Motors petrol driven engined vehicles where GMW 17332 is specified. This includes Holden Barina, Commodore, Captiva, Cruze, Malibu, Volt, Statesman & Caprice vehicles. It is also suitable for use in all HSV series vehicles post this date.

Enviro+ GF-S can be used in Chrysler /Jeep vehicles that specify MS-6395 and in Ford vehicles where Ford M2C946-A is the required specification. It can also be used by other manufacturers such as:

• Chrysler
• Ford
• Holden
• Honda
• Hyundai
• Infinity
• Kia
• Lexus
• Mitsubishi
• Nissan
• SAAB
• Subaru
• Toyota

And many other.

Vehicle and Fuel Types:

• Enviro+ GF-S is suitable for use in passenger cars, 4WD’s & light commercial vehicles. It can be used with Petrol, LPG (Dual Fuel & LPi Liquid Phase Injection), E10 and is designed for use with flexi-fuel vehicles that can run on both unleaded petrol and E85 ethanol blend fuels. It is the primary choice of lubrication for late model vehicles that are running ethanol blends of fuels. It is also suitable for late model vehicles with dedicated LPG systems including those with direct injection LPI. It is also suitable for use in Hybrid petrol/electric vehicles requiring this viscosity grade and specification.
• It is not recommended for use in diesel engines or in motorcycles with wet clutches.

Important Notes:

• Enviro+ GF-S replaces Enviro+ GF-5. It may be used in all applications where Enviro+ GF-5 was previously used.
• A 58mm cap with pouring tap is available to fit 7, 10 & 20 litre packs. 

Manufacturer's (OEM) Approvals & Industry Licenses:

• API SN Plus
• API SP Resource Conserving
• ILSAC GF-6A
• PRODUCT PERFORMANCE LEVELS
• API SN Plus
• API SP
• API SP Resource Conserving
• Chrysler MS-13340
• Chrysler MS-6395
• Ford M2C929-A
• Ford M2C946-A
• Ford M2C946-B1
• Ford WSS-M2C929-A
• Ford WSS-M2C961-A1
• GM 4718M
• GM 6094M
• GMW 17332 (dexos™ 1 Gen 2)
• ILSAC GF-6A

Suitable for Use where Specifications Below are Required:

• API SM
• API SN
• API SN Plus Resource Conserving
• API SN Resource Conserving
• ILSAC GF-3
• ILSAC GF-4
• ILSAC GF-5

Part number: EPLUSGF5001