Penrite ENVIRO+ C3 Full Synthetic 5W-30 1L - EPLUSC3001
Description:
ENVIRO+ C3 stands as a pinnacle of engine oil technology, endorsed by the API to meet API SP and API SN Plus specifications, ensuring uncompromised quality and satisfaction. It surpasses the latest European ACEA C2/C3 requirements and exceeds the standards set by numerous manufacturers.
Application:
ENVIRO+ C3 is meticulously crafted for utilization in modern engines, including 4, 6, and 8+ cylinder configurations with various features such as multi-cam, multi-valve, and Variable Valve Timing (VVT). Whether naturally aspirated, supercharged, or turbocharged, this oil is engineered to meet the demands of low-emission engines, even those equipped with or without Diesel Particulate Filters (DPFs). It's compatible with SAE 0W-30, SAE 5W-30, and SAE 10W-30 grade oils as recommended in the owner’s handbook. ENVIRO+ C3 is also suitable for engines requiring ACEA C2 or ACEA C3 oils, as well as API SP, API SN Plus, API SN, and API SM grade oils, along with ACEA A1/B1 (Obsolete), ACEA A5/B5, and ILSAC GF-5 specifications.
Vehicle & Fuel Types:
ENVIRO+ C3 caters to a wide array of vehicles, including passenger cars, 4WDs, and light-duty commercial vehicles. It's compatible with petrol, LPG, E10, diesel, biodiesel, and most other conventional fuels. However, it's not recommended for use in four-stroke motorcycles with wet clutches.
Maintenance Information:
For vehicles equipped with Diesel Particulate Filters, the use of Penrite ENVIRO+DPF CLEANER is recommended to ensure proper maintenance, prevent blockages, and enhance engine efficiency, power, and fuel economy. During oil changes, Penrite Engine Flush is advised for its fast-acting, solvent-free formulation that effectively removes engine deposits, sludge, and contaminants, offering added zinc for engine wear protection.
Benefits:
- Manufacturer-approved product to maintain vehicle warranty & specifications
- API licensed for quality and assurance
- Full synthetic high-performance base oil and latest advanced additive packs
- Maximum wear protection, minimum sludge formation & reduced piston deposits
- ACEA C2 fuel economy with ACEA C3 wear protection
- Enhanced Low Speed Pre-Ignition (LSPI) protection
- Reduced Turbo Charger Deposits
- Better wear protection for "Idle Stop" engines
- Improved oxidation and deposit control and aeration
- Exceeds many manufacturer vehicle requirements
- Long-life extended engine oil drain intervals
- Improved fuel economy
- Protection for emission control devices such as DPFs & catalytic converters
- Superior cold engine start-up performance, minimizing friction and wear at start-up
Note: A 58mm cap with pouring tap is available to fit 7, 10 & 20-litre packs.
*Mid SAPS oils may sometimes be referred to as Low Ash oils.
Part number: EPLUSC3001
Density at 15°C, kg/L | 0.856 |
Viscosity, Kinematic, cSt at 40�C | 72 |
Viscosity, Kinematic, cSt at 100�C | 11.7 |
Viscosity Index | 165 |
Cold Cranking Viscosity, cP at -30�C | 6133 |
Zinc, Mass % | 0.082 |
Phosphorus, Mass % | 0.070 |
Sulphated Ash, Mass % | 0.78 |
Total Base Number (TBN) | 7.8 |