Skip to content Skip to navigation menu

Nulon Red Premium Long Life Coolant 100% Concentrate 2.5L - RLL2.5

SKU: 3335044 / OA01368 Part Number: RLL2.5
Nulon Red Premium Long Life Coolant 100% Concentrate offers a service life of 8 years or 500,000 km (whichever comes first) when used at 50% V/V. It eliminates the need for supplemental coolant additives (SCA) in diesel engines. This coolant is suitable for Audi, Ford, Holden, Jaguar, Jeep, Land Rover, Peugeot, Skoda, Subaru, Toyota, Volkswagen, and more.
$38.99

Buy now, Pay later options

4 payments of $9.75
Check Suitability
Click & Collect
Click & Collect is not available for your location
Please select a location from the suggested list
Delivery
Delivery Not Available
Please select a location from the suggested list

Nulon Red Premium Long Life Coolant 100% Concentrate (RLL) provides the ultimate anti-freeze/anti-boil and corrosion protection for most late model vehicles, including petrol, diesel and heavy duty diesel applications. Red Long Life Coolant incorporates the most up to date Organic Additive Technology (OAT) carboxylate corrosion inhibitors. Red Long Life Coolant is nitrite and amine free to meet US requirements, phosphate free to meet European requirements and silicate free to meet Japanese requirements. Nulon RLL's carboxylate inhibitor package is more stable and stays in solution better than traditional coolants. This provides an extended shelf life of 8 years. Nulon RLL will not form solids inside cooling systems, or become abrasive to water pump seals. All of this means that RLL provides maximum corrosion and anti-freeze/anti-boil protection for up to 8 years or 500,000 km, (whichever comes first).

Nulon Red Premium Long Life Coolant 100% Concentrate is the preferred coolant to use in cooling systems that are fitted with aluminium radiators. It is a genuine 100% OAT based, long life coolant. RLL is dyed its distinct red/orange colour to instantly distinguish its unique chemistry from traditional green coolants. It should not be mixed with other coolants. As it is a concentrated coolant, it is to be used at 50% by volume in soft or demineralised water.

Nulon RLL provides maximum protection against cavitation erosion of wet cylinder liners in diesel engines. Red Premium Long Life Coolant 100% Concentrate is not recommended for use in cooling systems that have a copper/brass radiator (in such vehicles, use Nulon LL, which is green). If changing from any other coolant to Red Premium Long Life Coolant 100% Concentrate, always thoroughly flush the system first as cross contamination will reduce the life of Red Premium Long Life Coolant 100% Concentrate.

Benefits:

  • 8 years or 500,000 km service life (whichever comes first) when used at 50% V/V mix
  • Guaranteed to suit every vehicle where red/orange OAT based coolant has been specified
  • Provides optimum, long term protection against corrosion of all cooling system metals
  • Compatible with hoses and rubber fittings
  • Expands operating temperature range of cooling systems
  • Eliminates the need for supplemental coolant additives (SCA) in diesel engines
  • Reduces the incidence of nucleate or hot spot boiling
  • Not aggressive to water pump seals as is often the case with silicate based coolants
  • Performance of OAT inhibitors does not diminish with time
  • Particularly effective in controlling cavitation erosion of wet cylinder liners in diesel engines

Applications:

Nulon RLL is recommended for use in all vehicles that use a red or orange coloured coolant. Nulon Red Premium Long Life Coolant 100% Concentrate is principally designed for use where OAT coolant is required. It is particularly suited for use where AS/NZS 2108.1:2004 Type A, GM6277M or Toyota TSK2601G specifications are cited. Use in all cooling systems as a replacement for any red/orange coloured coolant. Among specific makes of vehicles that use red/orange coolant are Ford Falcon EA - EF, Holden Gen 3 & Gen 4 V8's and Alloytech V6, all Toyota models, Audi (some models), VW (some models), Jeep (most models), Chrysler (most new imports have red), Isuzu trucks, Daihatsu cars and trucks and Caterpillar.

Recommended step-by-step guide for changing all concentrated coolants:

  1. Before proceeding, read your owner's manual as some vehicles may have special requirements.
  2. Check that all hose connections are tight. Also check the condition of all hoses, fittings and belts.
  3. Use Nulon Radiator Flush and Clean (R40) to ensure that the radiator and engine are as clean as possible. This ensures maximum coolant life.
  4. R40 should be added to the old coolant. With the heater on, run the engine, or drive for 20 minutes minimum or 1 hour maximum.
  5. Stop the engine and allow it to cool. Remove the bottom radiator hose or drain plug to drain out all the old coolant. It is important to rinse out all traces of old coolant from the engine block and heater circuit. To best achieve this, refill the system with clean water, then run the engine up to operating temperature and when it is cool drain and flush it again. This will ensure a clean environment for the new coolant.
  6. Check the cooling system capacity of the vehicle and add the required dose of Nulon Concentrated Coolant (do not pre-mix) then fill with soft, clean or demineralised water. Any leftover product can be pre-diluted and used as a top-up.
  7. Some vehicles may require "air bleeding" to remove trapped air from the heater circuit and cylinder head. An air bleeding screw is located on the engine of some vehicles for this purpose. If you are unsure about this procedure please seek further advice before proceeding. Removing the return heater hose from the water pump to establish water flow, whilst topping up, will assist in reducing "air locks". Note: air locks can cause severe engine damage.
  8. Start the engine and monitor coolant level and temperature until the thermostat opens and the vehicle reaches operating temperature.
  9. When the vehicle cools down re-check the coolant level.

Note: This check sheet should be used as a guide only. Some vehicles may have special requirements that are not noted above. We strongly advise that you read your owner's manual or relevant workshop manual before proceeding with a coolant change.

SAFETY: Harmful if swallowed. May cause respiratory irritation. Use only outdoors or in a well-ventilated area. Store locked up.

FIRST AID: IF SWALLOWED: Immediately call a POISON CENTRE or doctor/physician. Rinse mouth. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. For advice, contact a Poisons Information Centre (e.g. phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once).

ENVIRONMENT: Do not pollute drains, soil or water with used products. After use, dispose of container in a responsible manner. Disposal of container should comply with local council regulations.

Part number: RLL2.5

INDUSTRY GROUPSPECIFICATIONS
AS ClaimsAS 2108-2004 Type A
ASTMASTM D2809
ASTMASTM D1384
HondaHonda Radiator Coolant Type 2 (Blue)
Other ClaimsJIS K2234 (Japan)
Society of Automotive Engineers (SAE)SAE J1034
ASTMASTM D4985
AudiAudi G12+
AudiAudi G12
ChryslerDaimler Chrysler MS-7170
BMWBMW (UK)
FordESE M97-B44A
FordESE M97-B18C
FordWSS-M97B44-D
FordESE M97-B44D
GMGM 1825M
GMGM 6277M
GMGM 1899M
ChryslerDaimler Chrysler MS-9769
MitsubishiMitsubishi ES-X64217
VolvoVolvo (UK)
MazdaMazda MES MN 121D
NissanNissan NES M 5509
Other ClaimsBS 6580:1992
ParafluParaflu 11
ToyotaTOYOTA SUPER LONG LIFE COOLANT
ToyotaToyota K2601G
VWVW G12+
VWVW G12
HondaHonda Longlife Coolant Type 2
PROPERTYNULON RLL
Density (g/ml at 20 DegC)1.114
Freezing Point (50% v/v in water) DegC-37
Boiling Point (undiluted) DegC>160
Boiling Point (50%v/v in water) DegC130
Reserve Alkalinity (ml)5
Glycol content (grams per litre)1090
pH (50% v/v in water)8.5
Foaming Volume, ml45 max
Break Time, seconds5 max
Mix ratioMakesBoils atFreezes at
0.51 litre makes 2 litres128 DegC-37 DegC
METALAS/NZS 2108.1:2004 WT. LOSS MG (MAX)TYPICAL RESULT FOR NULON LL
Copper102
Solder152
Brass102
Steel101
Cast iron103
Cast aluminium154
METALAS/NZS 2108.1:2004 WT. LOSS MG (MAX)`TYPICAL RESULT FOR NULON LL
Copper20 (max wt. loss)5
Solder60+1 (gain)
Brass204
Steel201
Cast iron20+2 (gain)
Aluminium601
MetalGM 1825M (RATING)ASTM D 3306 (RATING)TYPICAL RESULT FOR NULON LL
Cast aluminium8 min8 min9
NULON RLL CORROSION RATE (MG/CM2/WEEK)AS/NZS 21008.1:2004 (MAX ALLOWABLE RATE, MG/CM2/WEEK)
01

Nulon Red Premium Long Life Coolant 100% Concentrate 2.5L - RLL2.5

$38.99