Nulon Premium Mineral 15W-40 Diesel Engine Oil 5L - HP15W40-5
Nulon Premium Mineral 15W-40 Diesel Engine Oil 5L - HP15W40-5
Nulon 15W-40 Diesel High Protection Formula Engine and Motor Oil is a high lubricity, fully synthetic engine oil that provides the highest level of protection for diesel engines, large or small, non-turbocharged and turbocharged. This new additive technology Nulon has incorporated into HP15W40-5 provides excellent wear protection and fuel economy benefits over a wide range of operating conditions.
Benefits:
- Developed to offer excellent protection in small, medium and heavy duty diesel engines
- Safe for both turbocharged and non-turbocharged diesel engines
- Superior deposit control and valve train protection in modern high-performance and high-speed diesel engines
- Excellent low-temperature, cold-start performance
- Excellent viscosity control prevents thickening of the oil and controls soot
- Formulation based on high shear stable polymers giving excellent control of viscosity
LPG, CNG and Dual-fuel Systems:
- Provides excellent protection for engines fuelled with either LPG or CNG
- Also recommended for vehicles operating dual-fuel systems and is ideal for fleet use
Note: Not suitable for vehicles fitted with Diesel Particulate Filters (DPF). Refer to your vehicle service manual for correct lubricant requirements and service intervals
Caution: Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.
SAE Viscosity Grade | 15W-40 |
Viscosity @ 100°C (cSt) ASTM D445 | 14.92 |
Viscosity @ 40�C (cSt) ASTM D445 | 121.3 |
Apparent Viscosity by CCS @ -20�C (cP) ASTM D5293 | 6150 |
Apparent Viscosity by MRV @ -25�C (cP) ASTM D4684 | 23775 |
Viscosity Index ASTM D2270 | 126 |
Density @ 15�C (kg/L) ASTM D4052 | 0.8773 |
Sulphated Ash (mass %) ASTM D874 | 1.4 |
Total Base Number (mg KOH/g) ASTM D2896 | 10.4 |
Flash Point (�C) ASTM D92 | 215 |
Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification. |