Nulon Full Synthetic 5W-30 Long Life Performance Engine Oil 1L - SYN5W30-1
Nulon Full Synthetic 5W-30 Long Life Performance Engine Oil provides the maximum protection and performance from cold start-up to high operating temperatures. The energy conserving, low viscosity formula ensures optimum engine performance for all technically advanced and performance passenger car petrol engines.
The ILSAC GF-5 energy conserving formulation delivers improved fuel economy and engine protection. Additional anti-wear additives provide maximum performance and protection to engine and turbocharger components, while enhanced corrosion protection provides bio-fuel compatibility for vehicles using E10 and E85 fuels.
Benefits :
- Meets Holden and HSV warranty requirements where dexos1® 5W-30 is specified
- Oil stays cleaner and in-spec for longer
- Energy and fuel conserving formula
- Provides excellent engine cleanliness
- Reduces turbocharger deposit build-up
- Compatible with biofuels (Ethanol E10 and E85)
NOTE: Not recommended for diesel engines or vehicles fitted with DPF. Refer to your vehicle service manual or Nulon lube guide for correct lubrication requirements and service intervals.
First Aid and Safety
CAUTION: Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.
Suitable for use in the following manufacturers
- Chrysler
- Ford
- Holden
- Honda
- Kia
- Lexus
- Mazda
- Mitsubishi
- Nissan
- Subaru
- Suzuki
- Toyota
SAE Viscosity Grade | 5W-30 |
Viscosity @ 100°C (cSt) ASTM D445 | 10.66 |
Viscosity @ 40C (cSt) ASTM D445 | 63.92 |
Apparent Viscosity by CCS @ -30C (cP) ASTM 5293 | 6020 |
Apparent Viscosity by MRV @ -35C (cP) ASTM 4684 | 16800 |
Viscosity Index ASTM D2270 | 157 |
Density @ 15C (kg/L) ASTM D4052 | 0.8525 |
Sulphated Ash (mass %) ASTM D874 | 0.9 |
Total Base Number (mg KOH/g) ASTM D2896 | 8.5 |
Flash Point (C) ASTM D92 | 236 |
Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification. |