Engineered to suit various Toyota vehicles, the steering wheel control interface includes a harness that is fitted with a vehicle specific plug designed to connect directly into the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required.

Installation of the aftermarket headunit is simplified even further when paired with the optional Aerpro APP9 Head unit Secondary ISO Harness & SWC Patch Lead, which connects between the aftermarket head unit and the Aerpro Steering Wheel Control Interface.

This interface retains factory AUX input and Reverse Camera when connected to compatible aftermarket head units and also provides a Reverse Trigger.

Features:

• Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
• Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
• Supports OEM Phone Button when connected to compatible aftermarket Bluetooth head units
• Retains AUX input if originally fitted in the vehicle, aftermarket head unit requires rear AUX input
• Retains factory reverse camera if originally fitted to the vehicle, aftermarket head unit requires RCA reverse camera input
• Provides output feed for reverse trigger
• Fitted with a vehicle specific plug, no cutting of wires required
• Recommended to be installed with an Aerpro APP9 Head unit Secondary ISO Harness & SWC Patch Lead (sold separately)
• Requires SWC patch lead to provide compatibility with the aftermarket head unit (sold separately)

To suit the following vehicle/make/model:

• Toyota Camry 2017 -
• Toyota Hilux 2020-
• Toyota Corolla 2018-2022
• Toyota RAV4 2019-
• Toyota Granvia 2019-
• Toyota HiAce 2019-
• Toyota C-HR 2019-
• Toyota Yaris 2019-
• Toyota Fortuner 2020-
• Toyota Kluger 2021-

Note: 

• Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
• A Steering Wheel Control Patch Lead is required to be used in conjunction with this part to enable Steering Wheel Controls to function (sold separately).
• Aftermarket head unit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
• Retains AUX if originally fitted in the vehicle, aftermarket head unit requires rear 3.5MM AUX input.
• Retains factory reverse camera if originally fitted to the vehicle, aftermarket head unit requires RCA reverse camera input.

Part number: CHTO14C