Engineered to suit Nissan Navara NP300 ST / STX (2015-on) Models with OEM Navigation head units, the steering wheel control interface includes a harness that is fitted with a vehicle specific plug designed to connect directly into the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required.

Installation of the aftermarket head unit is simplified even further when paired with the optional Aerpro APP9 Head unit Secondary ISO Harness & SWC Patch Lead, which connects between the aftermarket head unit and the Aerpro Steering Wheel Control Interface.

This interface is CANBUS compatible and provides various outputs including Reverse Trigger, Park Brake and Speed Pulse. The interface also retains the OEM reverse camera (if equipped) and includes USB retention (if equipped) when connected to compatible aftermarket head units.

Features:

• Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
• Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
• Supports OEM Phone Button when connected to compatible aftermarket Bluetooth head units
• Retains OEM USB Input (if equipped), when connected to compatible aftermarket head units with USB
• Retains OEM Reverse Camera (if equipped) when connected to a compatible aftermarket AV head unit
• CAN-BUS integration compatible, no additional modules required
• Provides output feeds for reverse trigger, park brake and speed pulse
• Fitted with a vehicle specific plug, no cutting of wires required
• Recommended to be installed with an Aerpro APP9 Head unit Secondary ISO Harness & SWC Patch Lead (sold separately)
• Requires SWC patch lead to provide compatibility with the aftermarket head unit (sold separately)

To suit the following vehicle/make/model:

• Nissan Navara 2015-2020 D23 (Head unit Dependant)

Note:

• Aftermarket head unit must be SWC compatible.
• SWC patch lead is also required to enable SWC (sold separately).
• Retains OEM USB Input (if equipped), when connected to compatible aftermarket head units with rear USB input.
• Retains the OEM Reverse Camera (if fitted to the vehicle) and enables it to display on compatible aftermarket AV head units (with an RCA camera input).

Part number: CHNI4C