Aerpro Dual USB Charge And Sync To Suit Mitsubishi 19.5mm X 36.5mm - APUSBMT2
One port for fast charging (up to 3A) and one for USB pass-through sync with audio, CarPlay, and Android Auto.
Simple 3-wire connection and clip-in design make for quick and professional installation.
Buy now, Pay later options
The Aerpro APUSBMT2 Dual USB Charge & Sync is engineered for select Mitsubishi vehicles, replacing the factory switch blanking plates (19.5mm wide x 36.5mm high on the face, 21mm wide x 38mm high on the base).
This seamless upgrade integrates two USB ports into your dashboard: one for fast smartphone and device charging (up to 3A) and one for USB pass-through sync with audio, CarPlay, and Android Auto via compatible aftermarket headunits.
The bidirectional ports are easy to use with any cable orientation, and the illuminated charge port ensures visibility in all lighting conditions. Its clip-in design and straightforward 3-wire plus USB connection make installation quick and professional.
Kit Includes:
- Dual USB Charge & Sync Module
- Wiring Harness
- Installation Instructions
Features:
- Suitable for Mitsubishi vehicles with 19.5mm wide x 36.5mm high (face) / 21mm wide x 38mm high (base) switch blanking plates
- Replaces factory switch blanking plates in the dashboard
- Vehicle specific OEM style design for discreet seamless USB integration
- Dual USB ports, one fast charge and one sync pass through
- Charge port supports up to 3 amps max and illuminates blue
- Audio/sync port provides USB pass through for Audio, CarPlay & Android Auto when connected to compatible head units
- Bidirectional USB ports, allowing the cable to be connected either way
- Ferrite choke on USB cable to reduce signal interference
- 3 wire installation; accessory power, illumination, earth/ground, plus USB connection
To suit the following vehicle/make/model:
- Mitsubishi ASX 2010-2012 XA (Headunit Dependant)
- Mitsubishi ASX 2012-2014 XB (Headunit Dependant)
- Mitsubishi Challenger 2009-2013 PB
- Mitsubishi Challenger 2013-2015 PC
- Mitsubishi Lancer 2007-2013 CJ (Headunit Dependant)
- Mitsubishi Outlander 2003-2006 ZE, ZF
- Mitsubishi Outlander 2007-2012 ZG, ZH (Headunit Dependant)
- Mitsubishi Pajero 2000-2006 NM, NP
- Mitsubishi Pajero 2006-2014 NS, NT, NW (Headunit Dependant)
- Mitsubishi Pajero 2012-2019 NW, NX (Headunit Dependant)
- Mitsubishi Triton 2007-2009 ML [GL, GLX]
- Mitsubishi Triton 2007-2009 ML [GLS, GLX-R, VR]
- Mitsubishi Triton 2009-2014 MN [GL]
- Mitsubishi Triton 2009-2014 MN [GL-R, GLX]
- Mitsubishi Triton 2009-2012 MN [GLX-R]
- Mitsubishi Triton 2012-2014 MN [GLX-R]
- Mitsubishi Triton 2015 MN [GL, GLX, GLX-R]
Note:
- The AUDIO USB Port is pass through, it will only function when connected to the rear USB input of an aftermarket head unit.
- Not recommended for aftermarket head units with a USB lead from rear of unit. Recommended for aftermarket head units with USB port on the rear of unit.
Part number: APUSBMT2
Vehicle Application | Various Mitsubishi Vehicles |
Panel Dimensions | |
Body | 21mm (W) X 38mm (H) |
Face | 19.5mm (W) X 36.4mm (H) |
Connection Type | Dual USB |
USB 1 | Fast Charge 3.0a Max |
USB 2 | Pass Through (Audio And Sync) |
Mounting Type | Clip-in |
Wiring Installation | |
12v+ Accessory Power | Red |
Earth | Black |
Illumination | Blue |
USB Connection | USB-A |