Nulon Coolant Premix is formulated as a budget coolant that is suitable for most vehicles prior to 1988. This ready to use coolant provides mild anti-freeze/anti-boil protection while offering full corrosion protection for the entire radiator and cooling system. Guaranteed to protect for 3 years or 100,000 km. This product is safe to use in a variety of vehicles as a top-up to existing green coolant or as a full service coolant for older vehicles requiring Type B replacement coolant. For OEM replacement coolant choose Nulon Premium Long Life Coolant, available in both concentrate and pre-mixed (LL or LLTU).

Features:

• Anti-freeze/anti-boil protection for 3 years or 100,000 km
• Contains long life inhibitor technology for corrosion protection of cooling system metals
• Ready to use – just pour directly into the cooling system
• Suitable for a wide range of vehicles in Australia and New Zealand
• Protects aluminium, steel, cast iron, solder, copper and brass
• Safe for all hoses, gaskets and seals
• Safe to mix with existing green coolant

Directions as Complete Fill: Refer to the owner’s manual for cooling system capacity.

1. If the system is clean, ensure the engine is switched off, turn the heater on and drain the old coolant (when cool) by removing the drain plug or bottom radiator hose.
2. Then flush the cooling system with clean water to remove all traces of old coolant.
3. Add Nulon Coolant Premix. Secure the radiator cap start the engine, bleed air from the system if necessary.
4. Check the coolant level is correct when the system is cool.

As Top-up to Existing Coolant:

• Add as top-up to existing green coolant,then start the engine and turn the heater on. When the engine is warm, turn it off and allow it to cool. Check the coolant level, and top it up if necessary.

Note:

• The life of Nulon Coolant Premix when used as a top-up, defaults to that of the original coolant in the cooling system. If you are unaware of the type or life of the coolant in the system we recommend a complete coolant change within the next 5000 km or 6 months.

Characteristics:

• Density (g/ml @ 15.6ºC): 1.005 - 1.015
• Freezing point: -3ºC
• Boiling point: 122ºC (using 105kPa radiator cap)
• pH: 8.0 - 9.0
• Reserve alkalinity (ml): 2
• Colour: Green
• Glycol content (g/L): 70

Due to continued product research and development, the information contained in this Product Bulletin is subject to change without notification.

Safety Directions:

• Safety: Harmful if swallowed.
• First Aid:
  • If swallowed: Immediately call a poison centre or doctor/physician. Rinse mouth.
  • If inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
• Environment:
  • Do not pollute drains, soil, or water with used products.
  • After use, dispose of the container in a responsible manner.
  • Disposal of the container should comply with local council regulations.

Part number: PMC-1