The Phoenix Gold 4in Coaxial Speaker offers superior sound quality in a compact design. With a 4-inch driver, this coaxial speaker delivers clear, balanced audio, making it an ideal choice for upgrading your car’s audio system or enhancing any small space with high-fidelity sound.

Package Contents:

• 2 x Phoenix Gold Coaxial Speakers
• 2 x Phoenix Gold Speaker Grilles
• 1 x Mounting Template
• 8 x Mounting Screws
• 1 x User Manual

Features:

• Shallow Mount Design - Flush profile tweeter and a compact basket design for easy installation.
• Z-Series Cone - High-quality polypropylene cone material for great sounding audio.
• Butyl Rubber Surround - Excellent durability for prolonged performance and improved lateral cone stability.
• Ferrofluid Filled Tweeter - Enables enhanced thermal contact for improved reliability and optimum damping for the voice coil.

Note:

• Speaker Wire included with the component speaker system will only connect the tweeter to the speaker, additional wiring is needed to connect to the audio system.

WARNING:

• Do not drill mounting holes with speaker in place as this could allow drill shavings to damage the voice coil and void the speaker warranty.

Installation Guidelines:

• Ensure the audio system is turned off before making any connections to the amplifier, speakers or source unit. Failure to do so could result in permanent damage to the audio system. 
• When wiring the speakers ensure that the wire is protected from sharp objects and always use rubber grommets when wiring through metal panels. Ensure all terminals and connections are protected from the vehicle chassis and from each other as failure to do so could result in permanent damage to the audio system.
• When connecting the speakers to the source unit or amplifiers ensure you connect the positive and negative output wire from the source unit to the corresponding speaker terminals. This will ensure the audio system will be in phase.

1. Ensure there is adequate clearance and depth for the speaker to be mounted.
2. Use the supplied template to mark out & cut the correct diameter hole.
3. Drill four holes for the mounting screws.
4. Separate the grille from the frame
5. Insert the speaker and grille and affix with the screws provided
6. Complete installation by replacing the grille into the grille frame.

Part Number: Z4CX