Skip to content Skip to navigation menu

Permatex Anaerobic Gasket Maker 50mL - PX51813

SKU: 3179000 / DI04156 Part Number: PX51813
Permatex Anaerobic Gasket Maker is a noncorrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfaces.
$32.99

Buy now, Pay later options

4 payments of $8.25
Suitable For All
Click & Collect
Click & Collect is not available for your location
Please select a location from the suggested list
Delivery
Delivery Not Available
Please select a location from the suggested list

Permatex Anaerobic Gasket Maker is a noncorrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfaces. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Fills gaps up to .015″ and cures to a solvent-resistant seal that will not tear or decay during service. Parts disassemble easily even after extended service.

FEATURES

  1. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable
  2. Fills gaps to .015"
  3. Cures to a solvent-resistant seal that will not tear or decay during service
  4. Parts disassemble easily even after extended service
  5. Old gasket material can be removed in minutes with a putty knife

SUGGESTED APPLICATIONS

For use on machined aluminum metal components; transmission pans, transmission case covers, transaxle casings, transfer cases, split crankcases, pumps, and housings.

INSTRUCTIONS

TO MAKE A GASKET:

  1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
  2. Spray Permatex® Surface Prep™ activator on one surface only. Allow to dry 1-2 minutes.
  3. Apply a continuous bead of sealant to the unprimed surface.
  4. Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped away with a cloth and shop solvent.

TO DRESS A GASKET:

  1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
  2. Spray Permatex® Surface Prep™ activator to both flange surfaces. Allow to dry 1-2 minutes.
  3. Completely cover both sides of the precut gasket with sealant.
  4. Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.

Size: 50 ML

Permatex Anaerobic Gasket Maker 50mL - PX51813

$32.99