Penrite Enviro+ C5 0W-20 Full Synthetic Engine Oil is manufactured using advanced mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* additive technology.

Features:

• API licensed for quality assurance.
• Maximum wear protection, minimum sludge formation & reduced piston deposits.
• Shear stable VI improvers help maintain oil viscosity.
• Full synthetic base oils for maximum performance & protection.
• Enhanced LSPI protection.
• Low viscosity oil, providing a high level of fuel efficiency.
• Extends exhaust catalyst life.
• Long drain intervals.
• Emissions system friendly.
• Petrol & diesel suitability.
• Latest low emission additive technology.

Application:

• Enviro+ C5 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged low emission engines including those fitted with/without DPFs (Diesel Particulate Filters).
• Enviro+ C5 may be used where an SAE 0W-20 or 5W-20 low viscosity, fuel efficient engine oil is specified by the manufacturer. It can be used where ACEA A1/B1 (obsolete), ACEA A5/B5, BMW Longlife-14 FE+, Chrysler MS-12145, Fiat 9.55535-GSX, GMW 18006, ILSAC GF-5, Renault RN17FE, JLR STJLR.51.5122 and Volvo VCC RBS0-2AE low viscosity engine oils are required. It provides improved turbocharger deposit control, oxidation, aeration, fuel economy, fuel economy retention, timing chain and idle stop wear protection and enhanced low speed pre-ignition (LSPI) protection. It is suitable for selected Toyota, Mazda, Honda, Nissan, Subaru and many other makes and models.

Vehicle and Fuel Types:

• Enviro+ C5 is suitable for use in passenger cars, 4WD’s & light commercial vehicles and is compatible with Petrol, LPG, E10, E85, diesel, including those fitted with emission treatment devices such as Diesel Particulate Filters (DPFs), biodiesel and most other conventional fuels.

Important Maintenance Information:

• For vehicles fitted with a Diesel Particulate filter we recommend the use of Penrite Enviro+DPF Cleaner to clean & prevent DPF blockages, maximise catalyst life and improve engine efficiency, power & fuel economy.

Important Note:

• It is not recommended for use in motorcycles.
• When changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.

Manufacturer's (OEM) Approvals & Industry Licenses:

• API Licensed
• API SN Plus
• API SP Resource Conserving
• ILSAC GF-6A

Product Performance Levels:

• ACEA C5
• ACEA C6
• API SN Plus
• API SP
• API SP Resource Conserving
• BMW Longlife-17 FE+
• Ford M2C962-A1
• Ford WSS-M2C947-B1
• JLR STJLR 03.5006
• MB 229.71
• Opel OV0401547

Suitable for Use Where Specifications Below Are Required:

• ACEA A1/B1 (Obsolete)
• ACEA A5/B5
• API SN Plus
• BMW Longlife-14 FE+
• Chrysler MS-12145
• Fiat 9.55535-GSX
• GMW 18006
• ILSAC GF-5
• M2C962-A1
• MB 229.72
• Renault RN17FE
• STJLR.51.5122
• Volvo VCC RBS0-2AE

Part number: EPLUSC5006