Penrite Enviro+ 5W-20 Full Synthetic Engine Oil maximizes fuel economy while providing complete engine protection with its low viscosity and advanced mid SAPS (Sulphated Ash, Phosphorus and Sulphur) additive technology. Its premium full synthetic formula meets API SN and ACEA C5 specifications, ensuring optimal performance and long-lasting engine health.

Features:

• Current ACEA C5 specification.
• Maximum wear protection, minimum sludge formation reduced piston deposits and maximised fuel economy.
• Long engine oil drain intervals.
• Extended exhaust catalyst and oxygen sensor life.
• Suitable for Petrol / Electric Hybrid Vehicles.
• Ethanol fuel compatible - safe with E85.
• Emissions system friendly.
• Highly shear stable to minimise oil consumption.

Application:

• Enviro+ 5W-20 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged low emission engines, including hybrids.
• Enviro+ 5W-20 may be used where SAE 5W-20 or SAE 0W-20 grade, low viscosity, fuel efficient engine oils are specified by the manufacturer. It can be used where ACEA C5,  ACEA A1/B1 (obsolete), API SN, SM or ILSAC GF-5/GF-4 grade oils are specified.
• Enviro+ 5W-20 is also suitable for hybrid engines in Toyota/Lexus and Honda as well as others using this technology. Enviro+ 5W-20 should not be used where normally higher viscosity engine oil is recommended by the manufacturer.

Applications include:

• Chrysler
• Jeep
• Dodge
• Ford (FPV)
• Fiat
• Honda
• Hyundai
• Jaguar
• Land Rover
• Lexus
• Mazda
• Nissan
• Range Rover
• Subaru
• Toyota
• Volvo

These manufacturers, along with many others, specify low viscosity engine oils for their vehicles.

ENVIRO+ 5W-20 is designed for use with flexi-fuel vehicles that can run on both unleaded petrol and E85 ethanol blend fuels. It is the primary choice of lubrication for late model vehicles that are running ethanol blend fuels. It is also suitable for late model vehicles with dedicated LPG systems including those with direct injection LPI. It is also suitable for use in Hybrid petrol/electric vehicles requiring this viscosity grade and specification

Vehicle And Fuel Types:

• ENVIRO+ 5W-20 is suitable for use in passenger cars, 4WD’s & light commercial vehicles. It is NOT recommended for use in motorcycles. It can be used with Petrol, E10/E85 for everyday use, LPG (Dual Fuel & LPi Liquid Phase Injection) and light duty diesel engines with / without a DPF.

Important Maintenance Information:

• When changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.

Please Note: A 58mm cap with pouring tap is available to fit 7, 10 & 20 litre packs. 

Low SAPS oils may sometimes be referred to as Low Ash oils.

Product Performance Levels:

• ACEA C5
• API SN
• Chrysler MS-6395
• Ford M2C946-A
• Ford M2C948-A
• Ford M2C948-B
• Ford WSS-M2C930-A
• GM 4718M
• GM 6094M
• STJLR.03.5004
• STJLR.51.5122

Suitable for Use where Specifications Below are Required:

• ACEA A1/B1 (Obsolete)
• API SL
• API SM
• ILSAC GF-3
• ILSAC GF-4
• ILSAC GF-5
• Volvo VCC RBS0-2AE

Part number: EPLUS5W20005