Penrite HPR Diesel 5 5W-40 is a premium semi-synthetic engine oil designed for modern diesel engines. It provides exceptional protection, performance, and fuel efficiency, making it ideal for a wide range of diesel vehicles.

Features:

• Extra Ten provides an Extra Layer of engine protection.
• Full Zinc additive package for superior engine wear protection.
• Greater engine protection than 5W-30 grade oils.
• Minimises sludge formation.
• Less oil consumption compared to 5W-30 oils.
• Reduces wear by controlling soot deposits.
• Longer engine life.
• Reduced high temperature engine deposits.
• Longer oil life.
• Reduces wear due to advanced base oils.
• Better start up protection.
• Can be used in both Diesel & LPG engines.
• Suitable for hydraulically actuated injectors.
• Safe for wet clutch motorcycles.

Application:

• HPR Diesel 5 is designed for use in modern 4, 6 & 8+ cylinder multi cam, multi valve (Including VVT), naturally aspirated, supercharged, turbocharged common rail and direct injection engines. It is also suitable for diesel engines that are equipped with hydraulically actuated injector units.
• HPR Diesel 5 is recommended for use in vehicles where SAE 5W-30 or 5W-40 grade engine oils were originally recommended by the manufacturer. It can be used where fuel economy specifications ACEA A1/B1 (obsolete), ACEA A5/B5 and Global DLD-2 are specified in the owners hand book. It can also be used where API CI-4 / CI-4 Plus, Global DLD-2 / DLD-3 is required and where ACEA A3/B3, ACEA A3/B4 or ACEA E7 is recommended in model years prior to 2017. It is suitable for use in many older Diesel and LPG powered vehicles requiring an engine oil meeting API CH-4, CG-4, CF-4 or older specifications. It is also suitable for use where Ford specification M2C913-A/B/C is required for out of warranty service.
• HPR Diesel 5 is not recommended for use in diesels fitted with a DPF (Diesel Particulate Filter) that require an ACEA C grade Low-Mid SAPS (Sulphated Ash, Phosphorus & Sulphur) engine oil. We recommend checking the recommendation guide for the correct grade and specification.

Vehicle & Fuel Types:

• HPR Diesel 5 is suitable for use in diesel engines in passenger cars, motorcycles, 4WDs, light & heavy duty commercial engines in trucks, tractors, agricultural & earthmoving equipment as well as industrial equipment such as fork lifts & stationary engines. It can be used with Diesel & Petrol/E10/LPG (Dual Fuel). Suitable for petrol and LPG engines as a mixed fleet oil and can be used in motorcycles with wet clutches.

Extra Ten Technology:

• HPR Diesel 5 features the Penrite Extra Ten in the oil's SAE rating. This technology helps protect your engine by using a normal start up viscosity with an oil that has a higher operating temperature viscosity. This improves engine oil film strength, lowering frictional heat whilst providing an extra layer of anti wear protection over standard SAE grade oils, reducing engine wear in all driving conditions.

Important Information When Changing Oil:

• When changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.

Note:

• A 58mm cap with pouring tap is available to fit 7, 10 & 20 litre packs.

Product Performance Levels:

• ACEA A3/B4 (PRIOR TO 2017)
• ACEA E7 (PRIOR TO 2017)
• API CG-4
• API CH-4
• API CI-4
• API CI-4 PLUS/SL
• Ford M2C153-H
• Ford M2C171-C
• Ford M2C912-A1
• Ford M2C913-A
• Ford M2C913-B
• Ford WSS-M2C913-A
• Ford WSS-M2C913-B
• Global DLD-2
• Global DLD-3
• JASO DH-1
• MB 228.3.
• Opel B 040 2098
• Peugeot PSA D-02
• VW 502 00
• VW 505 00

Suitable For Use Where Specifications Below Are Required:

• Ford M2C913-C
• Ford WSS-M2C913-C

Part number: HPRD5005