Nulon Premium Mineral 10W-30 Fast Flowing Engine Oil 1L - PM10W30-1
Nulon Premium Mineral 10W-30 Fast Flowing Engine Oil 1L - PM10W30-1
Nulon Fast Flowing 10W-30 is an engine oil specially formulated to provide excellent cold-start flow, which minimises wear during start-up while also providing increased fuel economy and engine efficiency. Its unique formula provides improved protection throughout the engine's operating range including high load situations such as driving in traffic or in stop and go conditions.
Benefits:
- Blended for modern Australian, Japanese, US and European vehicles
- Provides excellent engine protection for daily driving
- Popular viscosity that provides excellent fuel economy
- Premium virgin mineral base oils provide superior performance and protection for everyday driving
- Excellent thermal stability provides protection from start-up to high operating temperatures and conditions
- Premium detergent and dispersant technology to keep engines clean and protected from sludge
- High shear stable polymers provide optimum control of viscosity until the next oil change
- Suitable as a running-in oil
First Aid and Safety:
Note: Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubricant requirements and service intervals.
Caution: Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.
SAE Viscosity Grade | 10W-30 Viscosity @ 100°C (cSt) ASTM D445 | 11.53 Viscosity @ 40�C (cSt) ASTM D445 | 79.05 Apparent Viscosity by CCS @ -25�C (cP) ASTM D5293 | 6180 Apparent Viscosity by MRV @ -30�C (cP) ASTM D4684 | 33700 Viscosity Index ASTM D2270 | 138 Density @ 15�C (kg/L) ASTM D4052 | 0.8684 Sulphated Ash (mass %) ASTM D874 | 0.7 Total Base Number (mg KOH/g) ASTM D2896 | 6.6 Flash Point (�C) ASTM D92 | 228 Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification. |