Power steering systems are generally very reliable and failures are rare, but regular inspections are important to preventative maintenance. Inspections should be carried out at each service and fluid level should be checked and replaced if the fluid is dirty. Also, drive belts should be checked for condition, correct tension and replace if necessary. Pulleys, mounting brackets and hoses should also be checked for condition as well.

Nulon Power Steering Fluid is designed for use in passenger cars and light trucks with power steering. See the vehicle owner's manual for the proper fluid type and capacity. Power steering systems typically contain only a small volume of lubricating fluid, and that fluid is subjected to quite harsh conditions, particularly heat, moisture and contamination. Periodically removing old, dirty and degraded power steering fluid and replenishing it with Nulon Power Steering Fluid will significantly extend the life of the entire power steering system.

Benefits:

• Compatible with most power steering systems
• Helps eliminate power steering chatter/shudder
• Contains anti-corrosion & anti-wear protection
• Use as a complete fill or top-up

Use Nulon Power Steering Fluid where the following specifications are called for:

• Caterpillar TO-2
• Denison
• Dexron II/III
• Ford M2C 138CJ
• Ford Mercon
• Type A Suffix A (TASA)
• Volvo 97335
• ZF TE-ML 05L
• ZF TE-ML 09
• ZF TE-ML 14A

Note: If your vehicle requires a specialised fluid such as SAAB 4634, MB 236.3, Audi/VW G 002 000 or Honda Type S or V, use Nulon 100% Synthetic Multi-Vehicle Power Steering Fluid (Part No. PSFMV).

Directions for Use:

Simply add to the power steering system reservoir. Fill the reservoir to the level specified by the max level and do not overfill. Repeat application when necessary, or when the system is serviced.

Part number: PSF500