Skip to content Skip to navigation menu

Nulon Dot 3 Brake Fluid 500ml - BF3

SKU: 4525798 / OA02240 Part Number: BF3
Compatible with all metals and rubber seals typically used in automotive braking systems. Suitable for all disc, drum, anti-skid ABS braking and electric stability control systems used in standard to high performance vehicles. Nulon DOT 3 Brake Fluid (BF3) is a high-performance poly-glycol brake fluid (DOT 3) which optimises the benefits of superior boiling point and high vapour lock temperature throughout its service life.
$12.99

Buy now, Pay later options

4 payments of $3.25
Check Suitability
Click & Collect
Click & Collect is not available for your location
Please select a location from the suggested list
Delivery
Delivery Not Available
Please select a location from the suggested list

Nulon DOT 3 Brake Fluid (BF3) is a high-performance polyglycol brake fluid (DOT 3) which optimises the benefits of superior boiling point and high vapour lock temperature throughout its service life.

Nulon BF3 is compatible with all metals and rubber seals typically used in automotive braking systems. It is intended for use both as initial fill and in aftercare markets. Nulon BF3 is manufactured as, a clear amber coloured fluid. It is suitable for all disc, drum, anti-skid ABS braking and electric stability control systems used in standard to high performance vehicles with high thermal load around the braking system.

Service Life:

Nulon BF3 should be changed every 24 months under standard driving conditions in order to maintain protection against vapour lock and corrosion.

Compatibility:

Nulon BF3 is only compatible with brake fluids that meet the DOT 3 brake fluid specifications.

Caution:

Do not spill on paintwork. If fluid is spilt on paintwork, do not wipe off, wash off immediately with water. Contamination of brake fluid or brake components with petroleum, oil, water, dirt, silicon fluids or other fluids may result in brake failure. Maintain cleanliness when handling brake components and dispensing equipment. Brake fluid absorbs moisture. Reseal all containers with caps immediately. Discard resealed containers after 12 months of opening. Dp not re-use empty containers.

Useful Information:

  • Nulon BF3 contains inhibitors to reduce corrosion of the many alloys components found in braking systems. Oxidation inhibitors are also used to prevent the oxidation process of the fluid.
  • Nulon BF3 has no adverse effect on the physical properties of the rubber cups and O rings used in the master and wheel cylinders.
  • Equilibrium reflux boiling point (ERBP) is the average temperature of a fluid boiling under equilibrium conditions (reflux) at atmospheric conditions. High performance brake fluids such as Nulon BF3 must have a high enough boiling point (ERBP) to resist vapour lock under severe braking conditions.
  • Note that the boiling point of the brake fluid will deteriorate significantly with moisture adsorption. With use, brake fluid absorbs water from the atmosphere and reduces the ERBP.
  • It is difficult to completely seal the braking system to prevent the ingress of atmospheric moisture or water splashes through hoses and the master cylinder. Brake fluids must withstand the absorption of at least 3% to 4% water without lowering the boiling point to a dangerous level. The presence of more free water significantly increases the chance of brake failure due to vapour lock and can promote corrosion of the brake system. This is why it is so critical to change the fluid every two years.

Part number: BF3

TestResult
pH7.9
Reserve alkalinity (ml)56
Flash point (open cup), �C141
Density @ 20�C (g/ml)1.065
Soluble In waterMiscible
PROPERTYTYPICAL RESULTAS 1960.1(GRADE 3)SAE J1703FMVSS NO.116(DOT 4)ISO 4925
Equilibrium Reflux Boiling Point (ERBP), °C min268230205205205
Wet Equilibrium Reflux Boiling Point (WERBP), �C min149140140140140
Viscosity (-40�C) mm�/s max12001500180015001500
Viscosity (100�C) mm�/s min21.51.51.51.5

Nulon Dot 3 Brake Fluid 500ml - BF3

$12.99