Skip to content Skip to navigation menu

Nulon 2 Stroke Full Synthetic Bike and Kart Engine Oil 1L - FS2ST-1

SKU: 8710941 / 265106 Part Number: FS2ST-1
Its advanced full synthetic formulation ensures optimal engine cleanliness and minimal deposit formation.
This oil provides superior lubrication and reduces wear, extending engine life and enhancing performance.
$46.99

Buy now, Pay later options

4 payments of $11.75
Check Suitability
Click & Collect
Click & Collect is not available for your location
Please select a location from the suggested list
Delivery
Delivery Not Available
Please select a location from the suggested list

Nulon 2 Stroke Full Synthetic Bike & Kart Engine Oil is an advanced, practically ashless/low ash formulation designed to provide optimum wear protection and low smoke production. Developed with biodegradable ester base oils, it is ideally suited for use in two-stroke engines found in motorcycles, go-karts, scooters and mopeds that use either a premix or oil injection system. Suitable for use in a wide range of recreational, motorcycle and go-kart applications where ester-based products are recommended.

Nulon 2 Stroke Full Synthetic Bike & Kart Engine Oil exceeds API TC, ISO EG-D and JASO FD specifications and should be used as per the below ratios. Check your owners handbook for the required mix ratio for your engine.

Benefits:

  • Low smoke
  • Dyed so that your fuel changes colour when you mix it
  • Reduces exhaust port blockages
  • Low deposits to keep piston rings free
  • Enhanced lubricity
  • Biodegradable
  • Mixes readily with petrol

Direction for Use: Simply add Nulon 2 Stroke Full Synthetic Bike & Kart Engine Oil to your fuel tank at the recommended treatment rate (shown below).

How to Use Measuring Chamber: Loosen cap on measuring chamber just enough to allow air release (around half a turn). Squeeze bottom of bottle to push fluid into the measuring chamber, releasing bottle once fluid reaches desired dosage. Remove cap from measuring chamber and pour fluid into fuel container, ensuring it is thoroughly mixed with petrol before adding mixed fuel to fuel tank. If fitted with an oil injection system, add the required quantity of oil to the oil tank. Replace cap and tighten for storage.

Note: Refer to your motorcycle or equipment service manual for correct lubrication requirements and service intervals.

Warning: Combustible liquid.

Safety: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves/protective clothing including eye/face protection.

First Aid: Avoid contact with skin and eyes. If contact occurs, wash thoroughly with soap and water. For advice, contact a Poisons Information Centre (e.g. phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once).

Environment: Do not pollute drains, soil or water with used products. After use, dispose of container in a responsible manner. Do not dispose of to landfill. Disposal of container should comply with local council regulations.

Part number: FS2ST-1

INDUSTRY GROUPSPECIFICATIONS
American Petroleum Institute (API)SL
American Petroleum Institute (API)TC
Japanese Engine Oil Standards (JASO)JASO FD
ISOEG-D

Nulon 2 Stroke Full Synthetic Bike and Kart Engine Oil 1L - FS2ST-1

$46.99