Liqui Moly Molygen New Generation 5W-40 Engine Oil 5L - 8536
Liqui Moly Molygen New Generation 5W-40 Engine Oil is a low-viscosity high-tech low-friction motor oil with high shear stability. Combined with innovative additive technology and the special Molygen additive. Reliably prevents the formation of deposits, reduces frictional losses in the engine and provides optimum protection against wear. The results are savings in fuel and an extended service life for the engine.
Best for modern gasoline and diesel engines with and without exhaust gas turbochargers. For the protection and value retention of the engine during long intervals between oil changes and with high loads.
Application:
Note the vehicle and engine manufacturers' operating instructions. Can be mixed with all commercially available motor oils. Full effectiveness only achieved when the product is not mixed.
Features:
- Outstanding engine cleanliness
- Excellent high and low temperature behavior
- Excellent wear protection
- Outstanding lubrication reliability
- High shear stability
- Miscible with all commercially available motor oils
- Optimum stability to aging
- Friction and wear reducing
- Instant lubrication after cold start
- Tested for turbochargers and catalytic converters
Liqui Moly recommends this product for vehicles that needs to comply the following specifications:
- ACEA A3
- ACEA B4
- API SN
- BMW Longlife-01 (up to 2018)
- Fiat 9.55535-H2
- Fiat 9.55535-N2
- Fiat 9.55535-Z2
- MB 229.5
- Opel GM-LL-B-025
- Porsche A40
- Renault RN 0700
- Renault RN 0710
- VW 502 00
- VW 505 00
Part Number: 8536
SAE class (engine oils) 5W-40 | SAE J 300 |
Density: | at 15 °C 0,850 g/cm� |
DIN: | 51757 |
Viscosity: | at 40 �C 90,0 mm�/s |
ASTM: | D 7042-04 |
Viscosity: | at 100 �C 14,5 mm�/s |
ASTM D | 7042-04 |
Viscosity: | at -35 �C (MRV) < 60000 mPas |
ASTM D | 4684 |
Viscosity: | at -30 �C (CCS) <= 6600 mPas |
ASTM D | 5293 |
Viscosity index | 170 |
DIN: | ISO 2909 |
HTHS: | at 150�C >= 3,5 mPas |
ASTM D: | 5481 |
Pour point: | -39 �C |
DIN: | ISO 3016 |
Evaporation loss (Noack): | 10,0 Gew.-% |
DIN: | 51581 |
Flash point: | 220 �C |
DIN:`ISO 2592 | |
Total base number: | 11,3 mg KOH/g |
DIN: | ISO 3771 |
Sulfate ash: | 1,0 - 1,6 g/100g |
DIN: | 51575 |
Color/Appearance: | Green, Fluorescent |
Shipping Weight: | 4.6300kg |