Liqui Moly Molygen New Generation 10W-40 is a high performance low-friction motor oil for year-round use. The combination of unconventional base oils and advanced additive technology as well as the special Molygen additive ensures that the motor oil is of low viscosity with a high shear stability and reliably prevents the formation of deposits, significantly reduces frictional losses in the engine and provides the optimum protection from wear. This results in fuel savings and an extended service life for the engine.
Best for modern gasoline and passenger car diesel engines with and without turbochargers. For the protection and value retention of the engine during long intervals between oil changes and where there are extreme demands on the engine.
Application:
- The operating instructions of the vehicle and engine manufacturers must be followed. Can be mixed with all commercially available motor oils. Optimum effect obtained only when not mixed.
Features:
- Outstanding engine cleanliness
- Excellent high and low temperature behavior
- Excellent wear protection
- High shear stability
- Miscible with all commercially available motor oils
- Optimum stability to aging
- Friction and wear reducing
- Instant lubrication after cold start
- Tested for turbochargers and catalytic converters
- Saves fuel and reduces pollutant emissions
Liqui Moly recommends this product for vehicles that needs to comply the following specifications:
- ACEA A3
- ACEA B4
- API SL
- Fiat 9.55535-G2
- MB 229.3
- Peugeot Citroen (PSA) B71 2300
- Renault RN 0700
- Renault RN 0710
- VW 501 01
- VW 502 00
- VW 505 00
Part Number: 9955
SAE class (engine oils): | 10W-40 SAE J 300 |
Density: | at 15 °C 0,865 g/cm� |
DIN | 51757 |
Viscosity | at 40 �C 95,0 mm�/s |
ASTM D | 7042-04 |
Viscosity at | 100 �C 14,2 mm�/s |
ASTM D: | 7042-04 |
Viscosity: | at -30 �C (MRV) < 60000 mPas |
ASTM D: | 4684 |
Viscosity at: | -25 �C (CCS) <= 7000 mPas |
ASTM D: | 5293 |
Viscosity index: | 155 |
DIN: | ISO 2909 |
HTHS at: | 150�C >= 3,5 mPas |
ASTM D: | 5481 |
Pour point: | -39 �C |
DIN: | ISO 3016 Evaporation loss |
(Noack): | 9,5 Gew.-% CEC-L-40-A-93 |
Flash point: | 220 �C |
DIN | ISO 2592 |
Total base number: | 11 mg KOH/g |
DIN | ISO 3771 |
Sulfate ash: | 1,0 - 1,6 g/100g |
DIN | 51575 |
Color/appearance: | Green, Fluorescent |
Shipping Weight: | 0.9700kg |