AF02 KWIKGRIP 50ML AUTOFIX AFKG

Features

• Heat resistance up to 130°C
• No clamping required
• Grabs immediately on contact
• Cured adhesive is resistant to dilute acids and alkalis

Where can this product be used?

• Excellent for bonding veneers of timber and laminated plastics, e.g. Laminex® and Formica® to bench or table tops
• Vertical surfaces and areas where clamping or pressing facilities are either not available or difficult to use
• Adhering to fabric sideof fabric-backed vinyl covering supports e.g. on door panels and other areas, re-fixing door and boot gaskets to car body.

What materials is this product suitable for?

• Cork
• Rubber
• Felt
• Canvas
• Leather
• Metals
• Timber
• Laminated plastics (laminex, formica)
• Hardboard
• Compressed board

How to Use

1. Ensure that surfaces to be bonded are clean, dry and free from, oil, grease, waxes or polishes.
2. Surfaces to be bonded should be relatively smooth and/or close fitting.
3. Both surfaces should be completely covered with adhesive and kept apart till 'touch dry' - no more than 40 minutes.
4. Position the items carefully, still keeping surfaces apart. When edges are perfectly aligned, press surfaces firmly together.
5. Secure bond by running a roller over the bonded surfaces or else by hammering the surface from the centre outwards using a padded block.
6. When small surface areas are to be joined a wet bond may be used. Simply apply Kwik Grip to one surface then bring the surfaces together and clamp until dry.

        Limitations:

• Not suitable for bonding rough, ill-fitting surfaces. Consider the suitability of alternative products such as Liquid Nails for these applications.
• Not for polyethylene, polypropylene plastics. Use Selleys All Plastic Fix.
• Kwik Grip should not be used in temperatures below 10°C.
• Not suitable for contact with gasoline or distillate.
• Not suitable for bonding rough ill-fitting surfaces.

Handy Tips:

• When small surface areas are to be joined a wet bond may be used. Simply apply Kwik Grip to one surface then bring the surfaces together and clamp until dry.
• Some plastics such as vinyl sheeting and polystyrene are attacked by Kwik Grip. Test in an inconspicuous area prior to application.

Clean Up

• Uncured product may be removed with mineral turps.
• Cured product can be sanded and scraped.