Nulon Ezy-Squeeze Multi-Vehicle Automatic Transmission Fluid 1L - NDEX3-1E
Suitable as a top up for automatic transmission and power steering system requiring Dexron or Mercon fluid.
Suits Audi, BMW, Ford, Hyundai, Mercedes, Mitsubishi, Nissan, Porsche, Renault, Skoda, Volkswagen, Volvo.
Nulon Ezy-Squeeze Multi-Vehicle Automatic Transmission Fluid is designed for use in many transmissions that call for General Motors Dexron III and Ford Mercon fluids. Nulon Ezy-Squeeze Multi-Vehicle ATF provides excellent wear protection, smoother shifting and is suitable as a top up with other Dexron and Mercon fluids.
Benefits:
- Excellent low temperature protection
- Compatible with wide range of seal materials
- Smooth transmission shift feel performance
- Excellent heat dissipation and foam suppression characteristics
- Can be used as top up with other Dexron III and Mercon fluids
Suitable for pre-2006 GM transmission that requires GM dexron III and in many other transmissions that specify Dexron or Mercon transmission fluid requirements (except Ford Type F). For higher level performance and heavy duty protection, upgrade to Nulon Semi Synthetic Multi-Vehicle Automatic Transmission Fluid (NATF), or Nulon Full Synthetic Multi-Vehicle Automatic Transmission Fluid (SYNATF).
Application:
- Automatic transmission that requires Dexron III, Ford Mercon and Allison C-4 performance
- Mitsubishi, Kia, and Hyundai automatic transmission SP-II/III
- Mazda transmission that requires Mazda III Fluid
- Toyota vehicles using 4 speed transmission (prior 2003)
- Suitable as a top up for automatic transmission and power steering system requiring Dexron or Mercon fluid
Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.
Health and Safety:
Avoid prolonged skin contact with used oils. Wear suitable gloves. If skin contact occurs wash immediately with soap and water. Protect the environment. Do not pollute drains, ground or water with used oils. Dispose of container as per local EPA guidelines. Do not use this container for fuel or solvents.
Part number: NDEX3-1E
Industry Group | Specifications |
Allison | C-4 |
Caterpillar | TO-2 |
Ford | MERCON |
Ford | M2C138-CJ |
Ford | M2C166-H |
GM | DEXRON II D/E |
GM | DEXRON III F/G/H |
GM | HN 2126 |
GM | DEXRON |
Mazda | M-III |
Mercedes Benz | 236.1 |
Mercedes Benz | 236.5 |
Mercedes Benz | 236.6 |
Mercedes Benz | 236.7 |
Typical Characteristics | NDEX3 |
KV @ 100 DegC, mm2/s ASTM D445 | 7.52 |
KV @ 40 DegC� mm2/s ASTM D445 | 40.28 |
Viscosity Index ASTDM D2270 | 156 |
Brookfield Viscosity @-40 DegC mPa.s ASTM D2983 | 13000 |
Flash point, °C, ASTM D92 | 208 |
Density @ 15�C, g/mL, ASTM D4052 | 0.854 |
Pour Point, �C, ASTM D97 | -48 |