Penrite HPR 15 15W-60 Full Synthetic Engine Oil is a premium, full synthetic engine oil designed to provide exceptional protection and performance for high-performance and older engines. Its unique formulation ensures superior lubrication, reduces wear, and extends engine life.

Features:

• Extra Ten provides an extra layer of engine protection.
• Full zinc additive package for superior engine wear protection.
• Latest SP oil specification technology for maximum wear protection, minimum sludge formation & reduced piston deposits.
• Enhanced LSPI (Low Speed Pre-Ignition) protection.
• Greater engine protection than 15W-50 grade oils.
• Less oil consumption compared to 15W-50 oils.
• Longer engine life.
• Reduced high temperature engine deposits.
• Longer synthetic oil life.
• Reduces wear by controlling engine deposits.
• Better start up protection.

Application:

• HPR 15 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines. It is not suitable for use in Rotary engines. It is particularly suited for use under high load conditions such as towing and competition or where ambient temperatures are high.
• It can be used where ACEA A3/B3 or A3/B4 is recommended in model years prior to 2017 and also where API SP and previous specifications SN, SM, SL, SJ or earlier specifications are recommended. It is suitable for use in many Diesel and LPG powered vehicles where API CF or older specifications are required.
• It is not recommended for use in diesel vehicles fitted with a DPF (Diesel Particulate Filter).

Vehicles and Fuel Types:

• HPR 15 is suitable for use in passenger cars, competition & high performance vehicles, 4WDs and light commercial vehicles and is compatible with Petrol, LPG (Dual Fuel), E10, E85 (competition), Diesel (Non- DPF) and other conventional and racing fuels. If using with E85, Penrite recommend more frequent service intervals.
• It is not recommended for use in motorcycles.

Extra Ten Technology:

• HPR 15 features the Penrite Extra Ten in the oil's SAE rating. This technology helps protect your engine by using a normal start up viscosity with an oil that has a higher operating temperature viscosity. This improves engine oil film strength, lowering frictional heat whilst providing an extra layer of anti wear protection over standard SAE grade oils, reducing engine wear in all driving conditions.

Important Information When Changing Oil:

• When changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.

Note: 

• A 58mm cap with pouring tap is available to fit 7, 10 & 20 litre packs. 

Product Performance Levels:

• API SP
• Ford M2C153-E
• Ford M2C902-A3
• GM 6094M
• MB 229.1.
• VW 501 01
• VW 502 00
• VW 505 00

Suitable for Use Where Specifications Below Are Required:

• ACEA A3/B3 (PRIOR TO 2017)
• API SL
• API SM
• API SN

Part number: HPR15005