Permatex Fuel Tank Epoxy putty is two part, hand kneadable, putty type epoxy stick used for repairing metal gas tanks and containers. When the contrasting colored materials are mixed together to form a uniform color to indicate thorough mixing. The resulting cured adhesive can be drilled, sanded, threaded or filed and it is resistant to fuels and most solvents after full cure.

FEATURES

1. Two part, hand kneadable, putty type epoxy stick
2. Used for repairing metal gas tanks and containers
3. Contrasting colored materials are mixed together to form a uniform color to indicate thorough mixing
4. Cured adhesive can be drilled, sanded, threaded or filed
5. Resistant to fuels and most solvents after full cure

SUGGESTED APPLICATIONS

Can be used on: Gas tanks and gas cans.

INSTRUCTIONS

Directions:

1. To achieve optimum adhesion, clean grease or dirt off surfaces to be repaired.
2. Wearing gloves, twist or cut off required amount.
3. Mix by kkneading epoxy stick to a uniform color. If mixing is difficult, warm epoxy stick to room temperature or slightly above.
4. Apply to the repair surface within 30 minutes of mixing, forcing into any cracks or holes to be filled. Remove excess material with a tool moistened with clean water before hardening begines.

NOTE: when applying to a damp, wet or slowly leaking area, work the mixed epoxy into the surface ad apply pressure until adhesion begins to take effect. Fuel Tank Repair epoxy sets in 1 hour, can be machined in 5 hours and fully cures in 24 hours.

DOES NOT ADHERE TO POLYETHYLENE OR POLYPROPYLENE PLASTICS. THIS MATERIAL IS NOT INTENDED FOR STRUCTURAL BONDING.