Penrite Enviro+ Hybrid 0W-16 Full Synthetic Engine Oil uses the latest advances in mid SAPS (Sulphated Ash, Phosphorus and Sulphur) additive technology and features low volatility synthetic base oil that minimises oil loss.

Features:

• API licensed and tested for quality guarantee assurance.
• Latest API SP Resource Conserving and ILSAC GF-6A oil specification.
• Maximum wear protection, minimum sludge formation and reduced piston deposits.
• Enhanced LSPI (Low Speed Pre-Ignition) protection.
• Better fuel economy and fuel economy retention.
• Reduced turbo charger deposits.
• Superior engine durability, timing chain and idle stop wear protection.
• Improved oxidation and deposit control, aeration and fuel economy over sn grade oils.
• Blended using premium hydrocracked base oils for heat resistance and high performance.
• Suitable for use with ethanol based fuels - safe for E85.
• Suitable for hybrid petrol/electric vehicles.
• Suitable for use in rotary engines.
• Safe for catalytic converters and oxygen sensors.

Application:

• Enviro+ Hybrid 0W-16 is designed for use in modern 4, 6 & 8+ cylinder,  multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged, low emission petrol engines, including petrol/electric Hybrid.
• Enviro+ Hybrid 0W-16 is designed for vehicles that run on low viscosity engine oils and is optimised for use in PETROL-ELECTRIC hybrid vehicles that specify this viscosity grade or SAE 0W-20 engine oils. It can be used where API SP Resource Conserving, SN Plus and ILSAC GF-6B is specified and where previous specifications SN (2010–2020), SM (2004-2010) are required as well as where fuel economy specification ILSAC GF-5 is recommended.
• Enviro+ Hybrid 0W-16 meets the latest API SP Resource Conserving specification providing improved turbocharger deposit control, oxidation, aeration, fuel economy, fuel economy retention, timing chain and idle stop wear protection and enhanced low speed pre-ignition (LSPI) protection.

Enviro+ Hybrid 0W-16 can be used where fuel economy oils are specified such as in Toyota Prius, Honda Civic and Lexus ES3000h. It can be used in vehicles manufacturer by:

• Honda
• Lexus
• Mitsubishi
• Nissan
• Toyota

Vehicle And Fuel Types:

• Enviro+ Hybrid 0W-16 is suitable for use in passenger cars, 4WDs & light commercial vehicles and can be used with petrol/gasoline including E10. It is NOT for use in vehicles not specifically designed to run on low viscosity engine oils.
• It cannot be used in diesel engined vehicles or in motorcycles.

Notes: 

• When changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
• A 58mm cap with pouring tap is available to fit 7, 10 & 20 litre packs. 
• Low and mid SAPS oils may sometimes be referred to as "Low Ash" oils.

Manufacturer's (OEM) Approvals & Industry Licenses:

• API LICENSED
• API SN Plus
• API SP Resource Conserving
• ILSAC GF-6B

Product Performance Levels:

• API SN Plus
• API SP
• API SP Resource Conserving
• ILSAC GF-6B

Suitable for Use Where Specifications Below Are Required:

• API SN
• API SN Plus Resource Conserving

Part number: EPLUSHYB0W16005