Penrite Enviro+ C3 5W-30 Full Synthetic Engine Oil is a high-quality, premium oil designed to provide exceptional protection, enhanced performance, and improved fuel efficiency for modern engines. It meets the stringent requirements of the ACEA C3 specification, making it ideal for vehicles equipped with advanced emission control systems.

Features:

• Manufacturer approved product to maintain vehicle warranty & specifications.
• API licensed for quality and assurance.
• Full synthetic high performance base oil and latest advanced additive packs.
• Maximum wear protection, minimum sludge formation & reduced piston deposits.
• ACEA C2 fuel economy with ACEA c3 wear protection.
• Enhanced LSPI (Low Speed Pre-Ignition) protection.
• Reduced turbo charger deposits.
• Better wear protection for "idle stop" engines.
• Improved oxidation and deposit control and aeration.
• Exceeds many manufacturer product vehicle requirements.
• Long life extended engine oil drain intervals.
• Improved fuel economy.
• Protection for emission control devices such as DPF’s & catalytic converters.
• Superior cold engine start-up performance, minimising friction and wear at start-up.

Application:

• Enviro+ C3 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged low emission engines including those fitted with/without DPF’s (Diesel Particulate Filters).
• Enviro+ C3 may be used where SAE 0W-30, SAE 5W-30 and SAE 10W-30 grade oils are recommended in the owner’s handbook. It can be used where ACEA C2 or ACEA C3 oils are specified by the manufacturer and meets the fuel economy* requirements of a C2 oil whilst maintaining the wear protection of a C3 oil.  It can also be used where API SP, API SN Plus or previous specification API SN or API SM grade oils are required and also where fuel economy specifications ACEA A1/B1 (Obsolete), ACEA A5/B5 and ILSAC GF-5 are specified.

Enviro+ C3 is approved against Mercedes-Benz 229.52 and is also suitable for use where BMW Longlife-04 oils are required. It can also be used where MB 229.31/229.51 or GMW 16177 oils are required in vehicles such as:

• BMW
• Chrysler
• Dodge
• Holden / GM
• Hyundai
• Jeep
• Kia
• Mercedes Benz
• Mitsubishi
• Nissan
• SsangYong
• Subaru
• Toyota

And many others.

Vehicle & Fuel Types:

• Enviro+ C3 can be used in passenger cars, 4WD’s & light duty commercial vehicles and is compatible with Petrol, LPG, E10, diesel, biodiesel and most other conventional fuels. It is not recommended for use in four stroke motorcycles with wet clutches.

Important Maintenance Information:

• For vehicles fitted with a Diesel Particulate filter we recommend the use of Penrite Enviro+DPF Cleaner to clean & prevent DPF blockages, maximise catalyst life and improve engine efficiency, power & fuel economy.

Note:

• When changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes. 
• A 58mm cap with pouring tap is available to fit 7, 10 & 20 litre packs.

Mid SAPS oils may sometimes be referred to as Low Ash oils.

2.6% vs reference oil in M111FE test.

Manufacturer's (OEM) Approvals & Industry Licenses:

• MB-Approval 229.52

Product Performance Levels:

• ACEA C2
• ACEA C3
• API SN Plus
• API SP
• BMW LL-04
• BMW Longlife-04
• Chrysler MS-11106
• Fiat 9.55535-S1
• Fiat 9.55535-S3
• Ford M2C946-A
• GMW 16177 (dexos2™)
• MB 229.31
• MB 229.51
• MB 229.52
• PSA B71 2297

Suitable For Use Where Specifications Below Are Required:

• ACEA A1/B1 (Obsolete)
• ACEA A5/B5
• API SN
• ILSAC GF-5

Part Number: EPLUSC3010