Penrite Enviro+ 5W-40 Full Synthetic Engine Oil 10L is the preferred choice for discerning vehicle owners seeking superior engine protection, performance, and longevity, backed by OEM and API certifications.It is a premium full synthetic engine oil, OEM approved and warranty approved, using advanced mid-SAPS additive technology for superior engine protection. It meets API SP specifications and exceeds ACEA C3 standards, ensuring high quality and satisfaction.

Features:

• Manufacturer approved product to maintain vehicle warranty & specifications.
• API licensed for quality assurance.
• Maximum wear protection.
• Minimum sludge formation.
• Reduced piston deposits.
• Long drain engine oil intervals.
• Excellent protection for emission control devices such as DPF’s & catalytic converters.
• Excellent resistance to viscosity and thermal breakdown even in extreme service.
• Superior cold engine start up performance, minimising friction and wear at start-up.
• Suitable for a wide range of Petrol & Diesel engines.

Application:

• Enviro+ 5W-40 is designed for use in passenger cars, 4WD's & light commercial vehicles. It is not recommended for use in motorcycles. It can be used with Petrol/LPG /E10 & Diesel (with/without DPF) as well as other conventional fuels.
• Enviro+ 5W-40 may be used where SAE 5W-30, SAE 10W-30, SAE 0W-40 and SAE 5W-40 grade oils are specified by the manufacturer. It can be used where API SP, SN Plus and previous API specifications SN, SM, SL, SJ are recommended and where ACEA A3/B3 and A3/B4 is recommended in model years prior to 2010. It can be used in modern petrol and light duty diesel engines where ACEA C3 or ACEA C2 is specified by the manufacturer and in LPG and diesel engines where API CF or earlier is required. It may also be used as a replacement for ILSAC GF-3, GF-4 and GF-5 grade oils and where ACEA A1/B1 (Obsolete) and ACEA A5/B5 fuel economy oils are required.
• Enviro+ 5W-40 is suitable for use in a wide range of petrol and light duty diesel vehicles including those fitted with a Diesel Particulate Filter (DPF). It is approved for warranty service by Mercedes Benz to MB-Approval 229.51 and can be used in GM vehicles requiring GMW 16177 (dexos2™), Volkswagen vehicles where VW 502 00 / 505 00 / 505 01 is specified. It can also be used in Porsche vehicles where Porsche A40 is needed and in BMW where BMW Longlife-04 is required as well as in many other makes and models including:
  • Alfa Romeo
  • Audi
  • Chrysler
  • Dodge
  • BMW
  • Fiat
  • Ford
  • Holden
  • Jeep
  • Lamborghini
  • Kia
  • Hyundai
  • Mercedes Benz
  • Mini
  • Mitsubishi
  • Nissan
  • Opel
  • Peugeot
  • Porsche
  • Renault
  • SAAB
  • Skoda
  • SsangYong
  • Tata
  • Toyota
  • Volkswagen (VW)
  • Many other makes and models

Important Maintenance Information:

• When changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added Zinc for engine wear protection and its fast acting formulation works in 10 minutes.
• For vehicles fitted with a Diesel Particulate Filter, we recommend the use of Penrite ENVIRO+DPF Cleaner to clean & prevent DPF blockages, maximise catalyst Life and improve engine efficiency, power & fuel economy.  Low SAPS oils may sometimes be referred to as "Low Ash" oils.

Please Note: A 58mm cap with pouring tap is available to fit 7, 10 & 20 litre packs. 

Manufacturer's (OEM) Approvals & Industry Licenses:

• MB-Approval 229.51

Product Performance Levels:

• ACEA C3
• API SN Plus
• API SP
• BMW LL-04
• BMW Longlife-04
• Chrysler MS-11106
• Fiat 9.55535-S2
• GMW 16177 (dexos2™)
• MB 229.31
• MB 229.51
• MB 229.52
• Porsche A40
• Renault RN 0700
• Renault RN 0710
• VW 502 00
• VW 505 00
• VW 505 01

Suitable For Use Where Specifications Below Are Required:

• A3/B4 (PRIOR TO 2010)
• ACEA A1/B1 (Obsolete)
• ACEA A5/B5
• ACEA C2
• API SL
• API SM
• API SN
• API SN/CF
• ILSAC GF-3
• ILSAC GF-4
• ILSAC GF-5

Part number: EPLUS5W40010