Penrite Enviro+ 5W-20 is a premium full synthetic engine oil designed for fuel efficiency and maximum protection. It utilizes advanced mid SAPS (Sulphated Ash, Phosphorus, and Sulphur) additive technology to optimize fuel economy while ensuring complete protection for engines requiring low viscosity oils.

Features:

• Current ACEA C5 specification.
• Maximum wear protection, minimum sludge formation, reduced piston deposits, and maximized fuel economy.
• Long engine oil drain intervals.
• Extended exhaust catalyst and oxygen sensor life.
• Suitable for petrol/electric hybrid vehicles.
• Ethanol fuel compatible - safe with E85.
• Emissions system friendly.
• Highly shear stable to minimize oil consumption.

Application:

• Enviro+ 5W-20 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged low emission engines, including hybrids.
• Enviro+ 5W-20 may be used where SAE 5W-20 or SAE 0W-20 grade, low viscosity, fuel-efficient engine oils are specified by the manufacturer. It can be used where ACEA C5, ACEA A1/B1 (obsolete), API SN, SM, or ILSAC GF-5/GF-4 grade oils are specified.
• Enviro+ 5W-20 is also suitable for hybrid engines in Toyota / Lexus and Honda as well as others using this technology. Enviro+ 5W-20 should not be used where normally higher viscosity engine oil is recommended by the manufacturer.

Applications include:

• Chrysler
• Jeep
• Dodge
• Ford (FPV)
• Fiat
• Honda
• Hyundai
• Jaguar
• Land Rover
• Lexus
• Mazda
• Nissan
• Range Rover
• Subaru
• Toyota
• Volvo

Enviro+ 5W-20 is designed for use with flexi-fuel vehicles that can run on both unleaded petrol and E85 ethanol blend fuels. It is the primary choice of lubrication for late-model vehicles that are running ethanol blend fuels. It is also suitable for late-model vehicles with dedicated LPG systems including those with direct injection LPI. It is also suitable for use in Hybrid petrol/electric vehicles requiring this viscosity grade and specification.

Vehicle and Fuel Types:

• Enviro+ 5W-20 is suitable for use in passenger cars, 4WDs & light commercial vehicles. It is NOT recommended for use in motorcycles. It can be used with Petrol, E10/E85 for everyday use, LPG (Dual Fuel & LPi Liquid Phase Injection), and light-duty diesel engines with/without a DPF.

Important Maintenance Information:

• When changing oil, Penrite recommends using Penrite Engine Flush, a fast-acting, solvent-free, engine cleaning formulation that removes engine deposits, sludge, and contaminants with the oil service drain. It contains added zinc for engine wear protection, and its fast-acting formulation works in 10 minutes.

Notes:

• A 58mm cap with pouring tap is available to fit 7, 10 & 20-liter packs.
• Low SAPS oils may sometimes be referred to as Low Ash oils.

Product Performance Levels:

• ACEA C5
• API SN
• Chrysler MS-6395
• Ford M2C946-A
• Ford M2C948-A
• Ford M2C948-B
• Ford WSS-M2C930-A
• GM 4718M
• GM 6094M
• STJLR.03.5004
• STJLR.51.5122

Suitable for Use where Specifications Below are Required:

• ACEA A1/B1 (Obsolete)
• API SL
• API SM
• ILSAC GF-3
• ILSAC GF-4
• ILSAC GF-5
• Volvo VCC RBS0-2AE

Part number: EPLUS5W20001