Send An Enquiry
Cleans drive chains of motorcycles, ATVs, karts, and other chain-driven devices.
Free from aromatic or halogenated hydrocarbons.
Proven by factory race teams.
Economical and fast-acting.
Breaks down grease, dirt, and grime easily.
Free from aromatic or halogenated hydrocarbons.
Proven by factory race teams.
Economical and fast-acting.
Breaks down grease, dirt, and grime easily.
$12.74
$16.99
Added to Your Cart
Product Availability by Store Location
Hours
Check Suitability
Click & Collect
Delivery
Penrite Chain Cleaner is a super strength, solvent based chain cleaner that rapidly dissolves and cleans chain and sprocket dirt, sand, grime, chain grease, wax, oil silicone as well as other lubricating solids and fluids used on chain drives. Its Non-Chlorinated, Non Corrosive and Non Staining formulation is fast, effective, convenient and easier to use than conventional solvents.
Features:
- Competition proven by factory race teams.
- Economical and fast-acting.
- Easily breaks down grease, dirt, and grime.
- Non-corrosive formulation.
- Cleans parts without the need for dismantling.
- Free from aromatic or halogenated hydrocarbons.
Application:
- Chain Cleaner is suitable for cleaning the drive chains of motorcycles (on and off-road), ATVs / Quads, Karts, and other mechanical devices that use a lubricated chain drive. It can also be used on push bike chains for fast effective removal of old lubricant. It is especially effective on motorcycle chain lubricants, greases, and waxes and rapidly breaks down old lubes for cleaning of the chain prior to new lubricant being applied. It may be used in standard X, O & Z-ring type chains. It is also suitable for cleaning chain sprockets, swing arms, and wheel hubs. It will not harm rubbers, plastics, and hoses.
- Chain Cleaner can also be used as an effective degreaser on oil and grease from surfaces such as engine parts and other surfaces where removal of grease, oil, sludge, and grime is required. It is especially suitable for all maintenance and repair work in Motorcycle, Automotive, and Marine workshops on engine parts but can also be used for cleaning of machine parts, tools, and all types of equipment.
Instructions for Use:
- Lift rear wheel from the ground.
- Place protective sheets under the cycle chain to be cleaned.
- Spray directly onto the chain and sprocket area.
- Allow the Chain Cleaner to penetrate, removing excess run-off with a cloth.
- For heavily soiled areas, scrub with a non-abrasive brush.
- When clean and dried, respray with Chain Lube Road or Chain Lube Race.
Part number: MCACC0004
Colour | Clear - Colourless |
Flash Point, °C | <-18�C |
Auto Ignition Temperature, �C | >230�C |
Penrite Chain Cleaner 400ml - MCACC0004
$12.74
$16.99
Added to Your Cart
Product Availability by Store Location
Hours