Penrite 15W-40 Semi Synthetic Engine Oil is a high-performance engine oil designed to provide excellent protection and efficiency for modern petrol and diesel engines. Its semi-synthetic formulation ensures superior lubrication, reducing wear and extending engine life.

Features:

• Meets API SP and ACEA A3/B4 specifications for quality and assurance.
• Complete engine protection.
• Full zinc anti-wear additive package for complete engine wear protection.
• Maximum wear protection.
• Minimum sludge formation.
• Reduced piston deposits.
• Enhanced LSPI (Low Speed Pre-Ignition) protection.
• Better wear protection for "idle stop" engines.
• Reduced turbo charger deposits.
• Improved oxidation and deposit control and aeration.
• Better high temperature protection than sae 10W-30 grade oils.
• Catalyst and oxygen sensor friendly.
• Petrol & Diesel compatible engine oil.

Application:

• Semi Synthetic 15W-40 is designed for use in modern 4, 6 & 8+ cylinder, multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines. It is not recommended for Rotary engines.
• Semi Synthetic 15W-40 is recommended for use in vehicles where SAE 15W-40 or SAE 20W-40 engine oils were originally recommended by the manufacturer. It can be used where ACEA or ACEA A3/B4 is specified as well as where API SP and previous API specifications SN Plus, SN, SM, SL and SJ were recommended. It is suitable for use in LPG and light duty diesel engines where , ACEA A3/B3 and A3/B4 are recommended.
• It is not recommended for use in diesels fitted with a DPF (Diesel Particulate Filter) that require an ACEA “C” grade Low-SAPS (Sulphated Ash, Phosphorus & Sulphur) engine oil.

Vehicle And Fuel Types:

• Semi Synthetic 15W-40 is suitable for use in passenger cars, 4WDs & light commercial vehicles and is compatible with Petrol/LPG (Dual Fuel), E10, Diesel (without DPF) and most other conventional fuels. If using with E85 fuel, Penrite recommend more frequent oil change periods. It is not recommended for use in four stroke motorcycles with a wet clutch. The appropriate Penrite MC-4ST motorcycle oil should be used for these applications.

Important Servicing Information:

• When changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.

Note: 

• A 58mm cap with pouring tap is available to fit 7, 10 & 20 litre packs.

Product Performance Levels:

• ACEA A3/B4
• API SP
• MB 229.1.
• Renault RN 0710
• VW 501 01
• VW 502 00
• VW 505 00

Suitable For Use Where Specifications Below Are Required:

• API SJ
• API SL
• API SM
• API SN

Part number: ED15W40001