Nulon Semi Synthetic 75W-80 Manual Gearbox and Transaxle Oil 4L - SS75W80-4
This fluid is recommended for modern vehicles requiring manual transmission fluid or where automatic transmission fluid is recommended in a manual gearbox. Nulon Semi-Synthetic 75W-80 Smooth-Shift Gearbox & Transaxle Oil is also a performance upgrade where a monograde SAE 80 is recommended. Suits Honda, Mazda, Nissan, Suzuki and other manufacturers where GL-4 specification is required.
Nulon Semi-Synthetic 75W-80 Smooth-Shift Manual Gearbox & Transaxle Oil is an extreme pressure API GL-4 premium semi-synthetic gear oil that provides smoother shifting in cold temperatures helps reduce gearbox noise and control idle rattle at higher operating temperatures. The special ingredients enhance the performance of high performance manual transmissions and will not break down or lose viscosity due to shear or oxidation.
Nulon Semi-Synthetic 75W-80 Smooth-Shift Gearbox & Transaxle Oil is the original performance manual transmission oil. It is recommended for modern vehicles requiring manual transmission fluid or where automatic transmission fluid is recommended in a manual gearbox. Nulon has developed a blend of advanced synthetic base stocks to provide high viscosity index and shear stability, long drain intervals and excellent protection against wear, scuffing, noise and lining corrosion.
Recommended for:
Passenger Cars: Ferrari, Ford, Holden, Lexus, Lotus, Porsche, Subaru, Toyota and other manufacturers where GL-5 performance is recommended.
Light Commercial and 4x4 Vehicles: Chrysler, Ford, Holden, Hyundai, Kia, Land Rover, Mazda, Mitsubishi, Nissan, Ssangyong, Suzuki, Toyota and other manufacturers where GL-5 performance is recommended.
Benefits:
- Excellent wear protection
- Superior oil film strength when compared to conventional mineral oil
- Improved protection for synchronisers during heavy load
- Easier low temperature shifting
- Thermal stability to withstand varied operating temperatures
First Aid and Safety:
Safety Directions: Avoid prolonged and repeated skin contact with used oil. During handling, wear suitable gloves and wash hands thoroughly after use. If skin contact occurs wash immediately with soap and water.
First Aid: For advice, contact a Poisons Information Centre (Phone: Australia 131 126; New Zealand 0800 764 766) or a doctor (at once).
Part number: SS75W80-4
Typical Characteristics | SS75W80 (new) | ||||||
SAE Viscosity Grade | 75W-80 | ||||||
KV @ 100°C, cSt | 7.540 | ||||||
KV @ 40�C, cSt | 53.23 | ||||||
Viscosity Index | 107 | ||||||
Density @ 15�C, g/mL | 0.8664 | ||||||
Pour Point, �C | -39 | ||||||
Brookfield Viscosity @-40�C, cP | 124000 | ||||||
?Note: If you are unsure of your vehicles requirements, consult your owners handbook or visit Nulon�s extensive product information website www.nulon.com.au or the reference chart where fluids are sold. | |||||||
Ford | ESW-M2C-83A/B GM | HN 1046 GM | HN 1070 GM | HN 1820 US Military | MIL-L-2105 ZF | ZF TE-ML-01 ZF | ZF TE-ML-08 |