Nulon Full Synthetic 5W-30 European Engine Oil (EURO5W30) 1L - EURO5W30-1
Nulon Full Synthetic 5W-30 European Engine Oil is specifically formulated and recommended for vehicles requiring VW petrol 504.00 and diesel 507.00 specification engine oil. PAO base stocks matched with advanced high-performance additives create the ultimate engine oil for modern European engines.
Nulon Full Synthetic 5W-30 European Engine Oil is approved under VW Standard 504.00 and VW Standard 507.00 for Volkswagen, Audi, Skoda and Seat petrol and diesel vehicles within manufacturer warranty periods.
PAO base stocks matched with advanced high-performance additives create the ultimate engine oil for these modern European engines during long drain service intervals.
Recommended for use in modern turbocharged, supercharged and normally aspirated diesel and petrol engines that require the highest level of protection and performance. This oil is also suitable for vehicles fitted with Diesel Particulate Filters (DPF’s).
Benefits:
- Designed for modern European petrol and diesel engines
- Approved for VW 504.00 petrol and 507.00 diesel specifications
- Suitable for modern-diesels fitted with Diesel Particulate Filters (DPF) and petrol engines fitted with Catalytic Converters (CATS)
- Enhanced engine protection during recommended long oil drain intervals
- Maintains viscosity under high-load and temperature conditions
- Provides superior cold start-up protection
- Energy/fuel conserving formula
- Provides excellent engine cleanliness
- Superior oxidation control and thermal stability
NOTE: Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubrication requirements and service intervals.
First Aid and Safety:
Avoid skin contact with used engine oils. Wear suitable gloves. If skin contact occurs wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used engine oils. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.
SAE Viscosity Grade | 5W-30 |
Viscosity @ 100°C (cSt) ASTM D445 | 12.04 |
Viscosity @ 40�C (cSt) ASTM D445 | 76.39 |
Apparent Viscosity by CCS @ -30�C (cP) ASTM 5293 | 6220 |
Apparent Viscosity by MRV @ -35�C (cP) ASTM 4684 | 16600 |
Viscosity Index ASTM D2270 | 154 |
Density @ 15�C (kg/L) ASTM D4052 | 0.8537 |
Sulphated Ash (mass %) ASTM D874 | 0.5 |
Total Base Number (mg KOH/g) ASTM D2896 | 5.4 |
Flash Point (�C) ASTM D92 | 227 |
Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification. |