Nulon Apex+ Full Synthetic 5W-40 Long Life Engine Oil 7L - APX5W40D2-7
Recommended for modern diesels fitted with Diesel Particulate Filters (DPFs).
General motors and Holden License approved.
Nulon APEX+ 5W-40 Long Life engine oil is a General Motors dexos2® license approved formula designed to provide ultimate performance and protection for all technically advanced passenger car and light commercial petrol and diesel engines, including vehicles fitted with Diesel Particulate Filters (DPFs).
Benefits:
- Ultimate protection for modern car and light commercial diesel engines
- Low viscosity ensures maximum fuel efficiency
- dexos2 license approved D225GCDB075
- Recommended for modern diesels fitted with Diesel Particulate Filters (DPFs)
- Provides excellent cold start-up protection
- Fast flowing, low viscosity formula
- Provides excellent engine cleanliness
- Provides excellent oxidation control and thermal stability
- Oil stays in-spec during long oil drain intervals
Note: Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubrication requirements and service intervals.
Safety: Avoid skin contact with used product. If skin contact occurs, wash area thoroughly with soap and water. For advice, contact a Poisons Information Centre (e.g. phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once).
Environment: Do not pollute drains, soil or water with used products. After use, dispose of container in a responsible manner. Do not dispose of to landfill. Disposal of container should comply with local council regulations.
SDS: Additional information is listed in the Safety Data Sheet at nulon.com.au.
Part number: APX5W40D2-7
Meets or exceeds the following vehicle manufacturer's specifications | |
GM dexos2 approved license D225GCDB075 | |
PORSCHE A40 | |
MERCEDES-BENZ 229.31/226.5 | |
RENAULT RN0700/RN0710 | |
Meets or exceeds industry specifications | |
Industry Group | Specifications |
European Constructors (ACEA) | C3 |
Society of Automotive Engineers (SAE) | 5W-40 |
American Petroleum Institute (API) | SN/CF |
Suitable for use in the following vehicle manufacturers | |
Alfa Romeo | Mercedes |
Chrysler | Mitsubishi |
Citroen | Nissan |
Holden | Peugeot |
Hyundai | Porsche |
Jaguar | Renault |
Jeep | Subaru |
Kia | Suzuki |
Land Rover | Toyota |
Typical characteristics | |
SAE Grade | 5W-40 |
Kinematic Viscosity @ 100 Deg C | 13.5 typ. |
Viscosity Index | >170 |
Density @ 15 Deg C | 0.85 |
High Temperature High Shear (HTHS) | >2.9 |
Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification. |