Castrol GTX is one of the world’s most trusted engine oils. The modern world creates difficult challenges for engines. Poor fuel quality, heat and frequent short trips can all lead to sludge that potentially shortens engine life. Sludge is a sticky deposit that can block your engine’s vital oilways and if untreated it can rob an engine of power and, ultimately, its life.
Castrol GTX with 3X CLEAN formula works to Catch - Control – Clean dirt from engine oilways, keeping your engine cleaner for longer and helping to extend engine life. Castrol GTX also protects against new sludge formation better than tough industry standards.
Castrol GTX 10W-30 is suitable for use in automotive petrol engines where the manufacturer recommends an API SP, ILSAC GF-6 or earlier specification 10W-30 lubricant. Help extend the life of your engine with Castrol GTX.
Features:
- Advanced protection against viscosity and thermal breakdown.
- Premium quality base oils and anti-wear additives to help extend the life of your engine.
- Helps minimise oil consumption.
- Superior cleaning of engine sludge caused by poor fuel quality, heat, and frequent short trips.
Application:
- Castrol GTX 10W-30 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an API SL/CF or earlier specification 10W-30 lubricant.
Product Performance Claims:
- API SL/CF
Storage:
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to hot sun or freezing conditions.
Part number: 3437456
Typical Characteristics: | |||
Name | Method | Units | Castrol GTX 10W-30 |
Density @ 15C, Relative | ASTM D4052 | g/ml | 0.8768 |
Viscosity, Kinematic 100C | ASTM D445 | mm�/s | 10.8 |
Viscosity, CCS -25C (10W) | ASTM D5293 | mPa.s (cP) | 6300 |
Viscosity, Kinematic 40C | ASTM D445 | mm�/s | 71 |
Viscosity Index | ASTM D2270 | None | 142 |
Pour Point | ASTM D97 | °C | -39 |
Flash Point, PMCC | ASTM D93 | �C | 213 |