Throughout its development, Autoglym chemists have continuously advanced the formulation, to produce a ceramic coating refined to a degree of unrivalled depth of gloss.

The Ultra High Definition Ceramic Coating kit includes all you need for a professional detailer-style preparation of your paintwork for this semi-permanent coating to lock in an immaculate finish that’s easier to care for, for up to 12 months.

What’s Inside The Box:

• 1 x UHD Preparation 100ml
• 1 x UHD Ceramic Coating 100ml
• 1 x UHD Ceramic Coating Applicator
• 1 x Preparation Cloth
• 1 x Finishing Cloth

Not for use on matt or satin finish paint.

Features:

• Semi-permanent coating to bond to its surface.
• Durable paint protection product.
• Locks in an immaculate finish for up to 12 months.
• Unrivalled depth of gloss, silky smooth, mirror-like finish.

How to Use:

1. Ensure the vehicle is clean, dry and free of contaminants. Wash the car thoroughly with a car shampoo and remove any fallout with a fallout remover or clay bar. Wipe down all of the paintwork to remove any existing waxes, sealants or oils still present on the surface.
2. Apply product directly to the Preparation Cloth and then wipe over the paintwork systematically in straight lines, ensuring all areas intended to be coated are covered. Wipe away any remaining reside with the Preparation Cloth.
3. [Paintwork Protection] Before you begin, carefully plan your application process. Ideally you will want to work in 50cm x 50cm sections (average sized panel) at a time. The temperature and humidity are likely to affect the drying and curing time required.
4. When the product appears to have formed small beads and a film is beginning to form, this is the time to buff off the product. On warmer days, this will take 1-2 minutes, on cooler days 3-5 minutes.
5. Apply UHD Ceramic Coating in straight lines using the UHD Ceramic Coating Applicator. After applying to one average sized panel, and allowing the appropriate curing time, buff well using the red Finishing Cloth.
6. Once you have coated and buffed all areas. Spot check the paintwork. Re-buff any missed sections with the Finishing Cloth. Allow Coating to cure, a minimum of 4 hours, it should remain out of wet weather & environments with high dust or contamination.