Polar Blast is a snow foam that can be applied using a pressure washer and Polar Blaster foam cannon, a hose-attached foam gun or hand foam sprayer as a pre-wash stage.

Polar Blast covers the vehicle in a rich blanket of foam that gently loosens and lifts dirt and heavy soiling prior to shampooing. This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination. Its pH neutral formulation will not remove any existing layers of polish or wax.

Polar Blast can be used at various dilutions depending on the density of foam desired. A good starting point is 100ml product to 500ml water in your foaming bottle. Adjust foam gun settings as required to increase or reduce foam.

Features:
• Foaming pre-wash or touchless wash
• 2.5L gives 25 full strength pre-washes
• pH Neutral
• Super rich, thick snow foam.

How to Use:
1. Spray Polar Blast onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.

2. Leave Polar Blast time to dwell and loosen dirt for up to 10 minutes, although do not allow it to dry on.

3. Finally, rinse thoroughly from the bottom up.