The Aerpro CHNI9C Steering Wheel Control Interface (SWC) allows you to seamlessly integrate an aftermarket head unit while maintaining the functionality of your factory steering wheel controls. Designed specifically for various Nissan vehicles without OEM Navigation, this interface ensures a straightforward installation.

Kit Includes:

• Steering Wheel Control Interface
• Camera Adapter
• Vehicle-Specific Harness

Features:

• Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
• Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
• Supports OEM Phone Button when connected to compatible aftermarket Bluetooth head units
• Retains OEM USB Input (if equipped), when connected to compatible aftermarket head units with USB
• Retains OEM Reverse Camera (if equipped) when connected to a compatible aftermarket AV head unit
• CAN-BUS integration compatible, no additional modules required
• Provides output feeds for reverse trigger, park brake and speed pulse
• Fitted with a vehicle specific plug, no cutting of wires required
• Recommended to be installed with an Aerpro APP9 Head unit Secondary ISO Harness & SWC Patch Lead (sold separately)
• Requires SWC patch lead to provide compatibility with the aftermarket head unit (sold separately)

To suit the following vehicle/make/model:

• Nissan Altima 2013-2016
• Nissan Navara 2015-2020 D23 (Head unit Dependant)
• Nissan Qashqai 2014-2021 J11 (Head unit Dependant)
• Nissan X-Trail 2014-2022 T32 (Head unit Dependant)

Note:

• Aftermarket head nit must be SWC compatible.
• SWC patch lead is also required to enable SWC (sold separately).
• Retains OEM USB Input (if equipped), when connected to compatible aftermarket headunits with rear USB input.
• Retains the OEM Reverse Camera (if fitted to the vehicle) and enables it to display on compatible aftermarket AV headunits (with an RCA camera input).
• To set clock, select AUX then press and hold for 8 seconds Source / OK (or Enter if no source button), "Track -" to change Hours ,"Track +" to change minutes. Short press Source to store, long press to exit without saving. If there is no option to select AUX it will need to be enabled. Go to Settings - Display Settings and enable it.

Part number: CHNI9C