This DBW setup will require three things to make it work: I. An accelerator pedal module (Sold Separately 0 280 755 05), 2. A throttle valve that can be opened and closed by an electric motor (DBW) and 3. A powertrain or engine control module (PCM or ECM) either factory or aftermarket.

The DBW will work with all applications with flex-fuels, CNG and LPG if they are injected in the air stream after the throttle body. The DBW is great for custom applications when a large throttle body is required with both 74mm and 82mm versions available for to suit various engine capacities.

• Opening direction is counterclockwise
• Two redundant sensors control the throttle position
• Drive-by-wire (DBW) electronic throttle bodies have an idle air position
• Temperature range is -40 to 140 degrees Celsius
• Can be connected directly to PCM/ECM units with ETC functionality
• Supply voltage is 6 to 16 V
• Output signal I: 0 to 5 V for 0 to 90 degrees
• Output signal II: 5 to 0 V for 0 to 90 degrees
• Bosch part number: 0 280 750 474

Part number: AF64-2135