Penrite 10W-40 Semi Synthetic Engine Oil is a premium quality, semi synthetic, SAE 10W-40, engine oil for use in a wide range of modern motor vehicles. It offers enhanced protection, maintains engine cleanliness, and provides reliable performance in various driving conditions.

Benefits:

• Meets API SP and ACEA A3/b4 Specifications for Quality and Assurance.
• Complete Engine Protection.
• Full Zinc Anti-wear Additive Package for Complete Engine Wear Protection.
• Maximum Wear Protection.
• Minimum Sludge Formation.
• Reduced Piston Deposits.
• Enhanced Lspi (Low Speed Pre-ignition) Protection.
• Better Wear Protection for “idle Stop” Engines.
• Reduced Turbo Charger Deposits.
• Improved Oxidation and Deposit Control and Aeration.
• Better High Temperature Protection Than Sae 10w-30 Grade Oils.
• Catalyst and Oxygen Sensor Friendly.
• Petrol & Diesel Compatible Engine Oil.

Application:

• Semi Synthetic 10W-40 is designed for use in modern 4, 6 & 8+ cylinder, multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines. It is not recommended for Rotary engines.
• Semi Synthetic 10W-40 is recommended for use in vehicles where SAE 10W-30 or SAE 10W-40 engine oils were originally recommended by the manufacturer. It can be used where ACEA A3/B3 or ACEA A3/B4 is specified as well as where API SP and previous API specifications SN Plus, SN, SM, SL and SJ were recommended. It is suitable for use in LPG and light duty diesel engines where API CF, ACEA A3/B3 and A3/B4 are recommended.
• It is not recommended for use in diesels fitted with a DPF (Diesel Particulate Filter) that require an ACEA “C” grade Low-SAPS (Sulphated Ash, Phosphorus & Sulphur) engine oil.

Vehicle And Fuel Types

• Semi Synthetic 10W-40 is suitable for use in passenger cars, 4WDs & light commercial vehicles and is compatible with Petrol/LPG (Dual Fuel), E10, Diesel (without DPF) and most other conventional fuels. If using with E85 fuel, Penrite recommends more frequent oil change periods. It is not recommended for use in four stroke motorcycles with a wet clutch. The appropriate Penrite MC-4ST motorcycle oil should be used for these applications.

Important Servicing Information

• When changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.

Product Performance Levels:

• ACEA A3/B4
• API SN Plus
• API SP
• MB 229.1.
• MB 229.3.
• Renault RN 0700
• Renault RN 0710
• VW 500 00
• VW 501 01
• VW 502 00
• VW 505 00

Suitable For Use Where Specifications Below Are Required:

• ACEA A3/B3
• API CF
• API SJ
• API SL
• API SM
• API SN
• API SN/CF

Part number: ED10W40001