Pioneer 10" TS-D10LS2 1300W D-Series Shallow Component Subwoofer - TSD10LS2
1300W, capable of delivering intense and powerful bass.
Typically around 300-400W RMS (check the exact RMS rating for precise matching with your amplifier). Read more...
![](/ab/_ui/responsive/common/images/universalPart.png)
Buy now, Pay later options
What’s in the Box:
- (1) 10" Subwoofer
- Trim ring
- (6) 1-1/8" Screws
- Adhesive backed foam gasket
- Manual (English/ German/ French/ Spanish/ Portuguese/ Italian/ Russian)
- Warranty information
Features:
- 10" Aramid Fibre Interlaced Injection Moulded Polypropylene (IMPP) cone construction
- Butyl rubber surround for strength and linearity during high excursion
- Shallow basket, small enclosure design for sound optimisation and installation flexibility
- D Subwoofer, FORCEFUL, DEEP, DEFINED
Too much isn’t enough, embrace the bass. The D subwoofer is a culmination of Pioneer technologies that produce thick, deep, powerful and accurate bass that makes listening to your favourite music energetic, fun and engaging.
Combining bass quality and bass quantity with high power, plus installation flexibility that provide high performance in both acoustic suspension (sealed) and bass reflex (ported) enclosures, the D subwoofer is the ultimate all-around performer. Slam, attack, power. Don’t just listen to your music, feel it.
Butyl Rubber Surround:
- Made of a specially blended, highly durable and moisture-resistant compound, butyl rubber keeps the cone moving in a linear direction, seals the cone to the basket and quickly dampens cone vibration once the signal has changed or stopped. This results in less distortion and superior frequency response.
Aramid Fiber Interlaced Injection Moulded Polypropylene (IMPP):
- Polypropylene (PP) is a tough thermoplastic resin that is an ideal material for a subwoofer cone - with low mass and high damping, PP cones offer good sensitivity and low distortion. However, polypropylene cones lack the rigidity and strength required for high output and extreme low bass. To resolve this, Pioneer engineers used advanced Computer-Aided Manufacturing to develop a process to blend aramid fibres into the polypropylene resin during the injection moulding process. The resulting Aramid Fibre Interlaced IMPP subwoofer cone is incredibly strong and low mass with high rigidity and superior strength to produce deep, powerful and undistorted bass.
Large Diameter Voice Coil and Double Stacked Magnets:
- A subwoofer motor structure consists of the voice coil and magnet assembly. Increasing the diameter and length of the voice coil provides greater control of the woofer cone and higher power handling. To take full advantage, however, the magnet must also be increased, both in magnetic power and physical size. The D subwoofer uses an oversized 4-layer voice coil and high energy double stacked magnets to increase the overall power handling and SPL output with no sacrifice in sound quality.
Part number: TSD10LS2
System Type | Component Subwoofer |
Sensitivity (1W/1m) | 74dB |
Frequency Range | 20 Hz to 3.4 kHz |
CTA-2031 Compliant | Yes |
Warranty | 1 Year |
Continuous Power handling (RMS) - Watts | 350 Watts |
Maximum Peak Power Handling - Watts | 1300 Watts |
Nominal Impedance - OHM | 2 |
Speaker Grill | Sold separately (UD-10GL) |
BUILD | |
Shape | Round |
Size | 10 |