Penrite Pro Series EGR & CAT Clean+ efficiently cleans and prevents deposit build-up in emission control devices, such as catalytic converters and EGR systems, enhancing their performance and longevity. Its non-flammable, low-volatility formula ensures safe and thorough cleaning, helping maintain optimal exhaust function and reducing harmful emissions.

Benefits:

• Powerful low cost alternative to costly repairs.
• Increases engine performance and improves fuel economy.
• Removes deposits from injectors, reducing misfire events.
• Cleans catalytic converters, reducing harmful build up.
• Cleans EGR passageways with continued use.
• Cleans oxygen sensors to smooth rough idling.
• Reduces CO, HC, and NOx emissions.
• Compatible with diesel, petrol/LPG and E10 fueled engines.

Application:

• EGR & CAT CLEAN+ is designed for use in in all 4, 6 & 8+ cylinder, multi cam, multi-valve including VVT, naturally aspirated, supercharged & turbocharged engines. It can be used in high performance and standard engines as well as in competition and normal on/off road use. It is not suitable for use in 2 Stroke engines.
• EGR & CAT CLEAN+ cleans deposits from intake valves, fuel injectors and combustion chambers for easier starts, faster acceleration, better airflow and increased efficiency. It cleans and prevents harmful deposits forming in catalytic converters, cleans EGR passageways with regular use and also cleans oxygen sensors for smoother idling and running.

How to Use:

• Use Only as Directed on Vehicles in Sound Mechanical Condition

Normal Fuel Additive Use:

• For routine and preventative maintenance, add EGR & CAT CLEAN+ (ECC+) directly to the fuel tank. Run the engine to clean the internals of the fuel pump, the fuel injectors or carburettor, the spark plugs where fitted, and the top piston rings. It will also remove any condensed water from these parts of the system. Due to the low flammability of ECC+, do not add to the fuel tank when lower than one-quarter full and do not add directly into fuel filter.
• The can is a one-dose system. Empty the entire can into approximately a quarter of a tank of fuel to enable it to remain concentrated as it goes through the cycle. Normally one treatment is sufficient to clean the system

Service Maintenance - for Professional Use Only:

1. For more intense cleaning of the lambda sensor, exhaust gas recirculation valve, catalytic converter or particulate filter; connect a flexible tube (e.g. vacuum pipe) from the inlet manifold into the can of ECC+.
2. Run the engine to draw the product into the areas where it will start to work and give the above benefits. The engine is likely to stall – this is because ECC+ is not a fuel. This signifies that the product is starting to do its job.
3. Leave the ECC+ in the system and remove the can of ECC+ and reconnect the vacuum pipe.
4. Turn the engine over until it starts – this may take several minutes as the ECC+ is replaced by fuel from the fuel tank. The unburned ECC+ will pass the lambda sensor and clean it. It will also clean the exhaust gas recirculation valve, catalytic converter and particulate filter.
5. Procedures 3-5 may be repeated to ensure sufficient product is drawn into the system to treat all the components.

Vehicle And Fuel Types:

EGR & CAT CLEAN+ is suitable for use in passenger cars and light commercial vehicles and can be used with vehicles running on Petrol/LPG, Diesel and E10. Suitable for use in Hybrid vehicles.

Part number: PSECC0005