Nulon Semi Synthetic 5W-30 Advanced Protection Engine Oil 5L - SEM5W30-5
Buy now, Pay later options
Nulon Semi Synthetic 5W-30 Advanced Protection Engine Oil provides advanced protection for modern petrol passenger cars that require a low viscosity 5W-30 engine oil. The technically advanced semi synthetic formula provides additional protection and performance over standard mineral engine oil. Specifically formulated to provide protection during long oil drain intervals and ensure the engine is protected on cold start-up.
High-temperature stability provides increased oxidation control in both turbocharged and non-turbocharged petrol engines.
For increased protection and performance choose Nulon Full Synthetic 5W-30 Long Life Engine Oil (Part No. SYN5W30).
BENEFITS
- Advanced semi synthetic formulation for modern passenger cars
- Low viscosity formula provides excellent fuel economy
- Fast flow formula provides instant cold start protection
- Enhanced protection for vehicles using E10, E85 and LPG fuels
- Premium detergents ensure excellent engine cleanliness
- High temperature stability provides excellent oxidation control
- Oil stays in-spec during long drain intervals
NOTE: Not recommended for heavy-duty diesel engines or vehicles fitted with DPF. Refer to your vehicle service manual for correct lubricant requirements and service intervals.
First Aid and Safety
CAUTION: Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.
SAE Viscosity Grade | 5W-30 |
Viscosity @ 100°C (cSt) ASTM D445 | 11.47 |
Viscosity @ 40�C (cSt) ASTM D445 | 71.02 |
Apparent Viscosity by CCS @ -30�C (cP) ASTM D5293 | 6040 |
Apparent Viscosity by MRV @ -35�C (cP) ASTM D4684 | 27700 |
Viscosity Index ASTM D2270 | 155 |
Density @ 15�C (kg/L) ASTM D4052 | 0.8576 |
Sulphated Ash (mass %) ASTM D874 | 0.8 |
Total Base Number (mg KOH/g) ASTM D2896 | 8.1 |
Flash Point (�C) ASTM D92 | 220 |
Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification. |