Nulon Hi-Tech 10W-30 Semi Synthetic Fast Flowing Engine Oil 1L - HT10W30-1
Formulated with advanced technology additives designed to provide the best protection and performance for modern petrol engines from the moment you turn the key. HT10W30-1. Read more...
![](/ab/_ui/responsive/common/images/checkSuitabilityIcon.png)
Buy now, Pay later options
Nulon Semi Synthetic 10W-30 Hi-Tech Fast Flowing Engine Oil?s low viscosity formulation provides excellent anti-wear protection from the moment you start the engine. Formulated for high-performance multi-valve and turbocharged 4, 6 and 8 cylinder modern petrol engines including LPG. Suitable for light duty diesel engines.
Benefits:
- Superior semi synthetic formula provides enhanced protection over mineral oils
- Suits modern Australian, Japanese, US and European vehicles
- Provides excellent fuel economy over thicker mineral oils
- Provides maximum cold start engine protection
- Enhanced protection for vehicles using E10, E85 and LPG fuels
- Reduced oil consumption compared to mineral-based fluids
- Excellent detergent and dispersant technology to keep engines clean and protected from deposits
- High shear stable polymers provide optimum control of viscosity
- Safe for catalytic convertors
- Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.
Note: Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubricant requirements and service intervals.
First Aid and Safety:
Caution: Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.
Part number: HT10W30-1
SAE Viscosity Grade | 10W-30 |
Viscosity @ 100°C (cSt) ASTM D445 | 11.51 |
Viscosity @ 40�C (cSt) ASTM D445 | 78.55 |
Apparent Viscosity by CCS @ -25�C (cP) ASTM D5293 | 6260 |
Viscosity Index ASTM D2270 | 139 |
Density @ 15�C (kg/L) ASTM D4052 | 0.8674 |
Sulphated Ash (mass %) ASTM D874 | 0.8 |
Total Base Number (mg KOH/g) ASTM D2896 | 6.9 |
Flash Point (�C) ASTM D92 | 222 |