Buy now, Pay later options
Nulon Full Synthetic 5W-40 Diesel Engine Oil 1L - SYND5W40-1
Nulon Full Synthetic 5W-40 Passenger and Light Commercial Engine Oil is designed to provide the ultimate protection for all technically-advanced passenger and light commercial diesel engines. Specifically formulated to offer a higher level of protection over fuel conserving 5W-30 engine oil, this oil is suitable for turbo and non turbocharged SUV, passenger cars and light commercial vehicles as well as those needing enhanced protection during long oil drain intervals.
Safe to use in modern diesel engines fitted with catalysts and Diesel Particulate Filters (DPF) requiring ACEA C3 specification. These engines require an engine oil with a low Sulphated-Ash, Phosphorus and Sulphur content (Low SAPS).
Benefits:
- Ultimate protection for modern diesels and light commercial diesel engines.
- Recommended for modern diesels fitted with Diesel Particulate Filters (DPF)
- Provides excellent cold start-up protection
- Fast flowing low viscosity formula
- Provides excellent engine cleanliness
- Provides excellent oxidation control and thermal stability
- Oil stays in-spec during long oil drain intervals
First Aid and Safety:
Note: Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubrication requirements and service intervals.
Caution: Avoid skin contact with used engine oils. Wear suitable gloves. If skin contact occurs wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used engine oils. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.
SAE Viscosity Grade | 5W-40 Viscosity @ 100°C (cSt) ASTM D445 | 13.31 Viscosity @ 40�C (cSt) ASTM D445 | 82.48 Apparent Viscosity by CCS @ -30�C (cP) ASTM D5293 | 5610 Apparent Viscosity by MRV @ -35�C (cP) ASTM D4684 | 34300 Viscosity Index ASTM D2270 | 164 Density @ 15�C (kg/L) ASTM D4052 | 0.8547 Sulphated Ash (mass %) ASTM D874 | 0.8 Total Base Number (mg KOH/g) ASTM D2896 | 7.2 Flash Point (�C) ASTM D92 | 230 Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification. |