Nulon Full Synthetic 5W-30 Fuel Efficient Engine Oil 5L - SYNFE5W30-5
Buy now, Pay later options
Nulon Full Synthetic 5W-30 Fuel Efficient Engine Oil provides the maximum protection and performance from cold start-up to high operating temperatures. The fuel conserving, low viscosity formula ensures optimum engine performance for all technically advanced and performance petrol, passenger and light commercial diesel engines
Nulon Full Synthetic 5W-30 Fuel Efficient Engine Oil is specifically designed for fuel efficiency with improved wear protection and sludge handling.
Benefits:
- Provides maximum cold-start protection
- Added Moly DTC provides additional protection over standard engine oil alone
- Outstanding wear protection during stop-start, city or highway driving
- Energy and fuel conserving formula
- High-quality detergents and dispersants reduce internal engine deposits
- High shear stable polymers ensure oil stays in spec for longer
First Aid and Safety:
Note: Refer to your vehicle service manual for correct lubrication requirements and service intervals.
CAUTION: Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.
SAE Viscosity Grade | 5W-30 |
Viscosity @ 100°C (cSt) ASTM D445 | 10.45 |
Viscosity @ 40�C (cSt) ASTM D445 | 63.31 |
Apparent Viscosity by CCS @ -30�C (cP) ASTM D5293 | 5940 |
Apparent Viscosity by MRV @ -35�C (cP) ASTM D4684 | 29000 |
Viscosity Index ASTM D2270 | 154 |
Density @ 15�C (kg/L) ASTM D4052 | 0.8554 |
Sulphated Ash (mass %) ASTM D874 | 0.9 |
Total Base Number (mg KOH/g) ASTM D2896 | 7.9 |
Flash Point (�C) ASTM D92 | 223 |
Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification. |