Nulon Full Synthetic 5W-20 Fuel Conserving Engine Oil 5L - SYN5W20-5
Buy now, Pay later options
Nulon Full Synthetic 5W-20 Fuel Conserving Engine Oil 1L - SYN5W20-5
Nulon Fuel Conserving 5W-20 Full Synthetic Engine Oil is specially formulated to provide optimum fuel economy while maintaining a high level of engine protection during long oil drain intervals and cold start-up. Nulon Full Synthetic 5W-20 is designed to provide the ultimate protection for all new generation passenger car and light commercial petrol engines that require an ultra-low viscosity 5W-20 engine oil.
Nulon Full Synthetic 5W-20 Fuel Conserving Engine Oil has added Molybdenum Dithiocarbamate to give you additional high-level wear protection and performance. Molybdenum Dithiocarbamate is proven to dramatically reduce friction and provide increased engine wear protection from cold start to extreme temperatures, giving you added benefits over standard engine oil alone.
Benefits
- Ultra low viscosity fuel efficient formula
- Added Molybdenum Dithiocarbamate provides more protection and performance over engine oil alone
- Provides excellent cold startup protection
- Ultrafast flowing formula
- Provides excellent engine cleanliness
- Provides excellent oxidation control and thermal stability
- Oil stays in-spec during long drain intervals
Note: Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubricant requirements and service intervals.
First Aid and Safety:
Caution: Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.
SAE Viscosity Grade | 5W-20 |
Viscosity @ 100°C (cSt) ASTM D445 | 8.860 |
Apparent Viscosity by CCS @ -30�C (cP) ASTM 5293 | 6040 |
Apparent Viscosity by MRV @ -35�C (cP) ASTM 4684 | 19400 |
Viscosity Index ASTM D2270 | 145 |
Density @ 15�C (kg/L) ASTM D4052 | 0.8542 |
Sulphated Ash (mass %) ASTM D874 | 0.9 |
Total Base Number (mg KOH/g) ASTM D2896 | 7.5 |
Flash Point (�C) ASTM D92 | 225 |